Operating instructions

12
Useful Telephone Settings
Guide to base unit settings
To customise the base unit:
1 {j/OK} i “SETTING BS” i {>}
L “INPUT CODE” is displayed.
2 Enter the desired code number. Follow the instructions in the “Feature” column of the
chart.
L To exit the operation, press {ih}.
Code No. Feature (Default setting)
{0} Reset base unit to its default settings.
*1
− Enter base unit PIN (default: “0000”). i {>}
{2} {2} Base unit ringer volume (Medium)
− Select the desired setting by pressing {1} for low, {2} for medium, {3}
for high or {0} for off. i {>}
{3} Dialling mode (Tone): page 7
Flash time (600 ms)
*2
− Enter base unit PIN (default: “0000”). i {2} i {1}
− Select the desired setting by pressing {1} for 100 ms, {2} for 600 ms
or {3} for 300 ms. i {>}
DTMF mode (Off): page 14
{5} Change base unit PIN (“0000”).
*3
− Enter the current 4-digit base unit PIN.
− Enter the new 4-digit base unit PIN.
− Enter the new 4-digit base unit PIN again.
TCD150FX(e-e).book Page 12 Thursday, June 9, 2005 6:59 PM