Installation Manual Additional Digital Cordless Handset Model No. KX-PRXA10E KX-PRXA15E Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone: - KX-PRX120 (KX-PRXA10) - KX-PRX150 (KX-PRXA15) (The corresponding models are subject to change without notice.) You must register this handset with your base unit before it can be used.
Installation Supplied accessories Accessory item/Part number Quantity 1 Charger*1 AC adaptor*2 1 Rechargeable battery*3 1 Handset cover*4 1 *1 *2 *3 *4 KX-PRXA10: PNLC1049ZA (White) KX-PRXA15: PNLC1048ZA (Black) KX-PRXA10: PNLV226EK KX-PRXA15: PNLV230E Please read the base unit’s documentation for replacement battery information. The handset cover comes attached to the handset. Note: R Please read the base unit’s documentation for additional/replacement accessories.
Installation n KX-PRXA15 A Insert the AC adaptor plug firmly into the charger. B B Connect the AC adaptor to the power outlet. A Note: R Use only the supplied Panasonic AC adaptor PNLV226EK*1/PNLV230E*2. R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) *1 KX-PRXA10 *2 KX-PRXA15 Preparing the handset Inserting a SIM card, microSD card, and the battery A SIM card (not supplied) allows the handset to connect to a mobile phone service.
Installation 2 KX-PRXA15 only: Position the SIM card with the gold-coloured contacts facing down, and then carefully slide the SIM card all the way into the SIM card slot. 3 Open the microSD card cover by sliding it toward the nearest side of the handset (A) and then lifting up (B). 4 5 Insert the microSD card with the gold-coloured contacts facing down, close the microSD cover (A), and then gently slide the cover toward the opposite side of the handset (B).
Installation Charging the handset Charge the handset for about 5 hours before initial use. The charge indicator (A) lights while the handset is charging and turns off when the handset is fully charged. Important: R If the handset is placed into the charger while talking on the phone, the call is not disconnected. A A or Place the handset into the charger. Connect the AC adaptor directly to the handset.
Installation For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth.
Installation Battery R Use only the specified battery or additional/replacement battery noted in the base unit’s documentation for replacement battery information. R Do not open or mutilate the battery. Released electrolyte from the battery is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the battery.
Installation Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Notice for downloading software or upgrading the operating system R Product functions and operating procedures may change and certain applications may not function any longer if the product’s operating system is upgraded. R Confirm the safety and security of software before downloading or installing it on this product.
Installation Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union These symbols (A, B, C) are only valid in the European Union.
Installation End-user licence This is an agreement between you and Panasonic System Networks Co., Ltd. (“Panasonic”) with respect to the software installed in this product. Carefully read the terms of this agreement prior to using this product and using indicates your acceptance of these terms. Copyright: The software is protected by copyright laws and international treaty provisions, and all other applicable laws.
Installation Disclaimer Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product. The use of downloaded content may be restricted or prohibited by the rights of third parties, including but not limited to restriction under applicable copyright laws. You are entirely responsible for additional content that you download to or forward from this product; Panasonic is not responsible for such content or its use.
Sales Department: Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan © Panasonic System Networks Co., Ltd. 2013 *PNQX6201ZA* *PNQX6201ZA* PNQX6201ZA PRXA10_15E_(en-en)_7011_ver.010.
