Operating instructions

80
Care and Maintenance
Clearing a Jam
■Clearing a media jam
If the printer has frequent media jams, make sure that you follow these guidelines:
BAlways use high-quality laser paper and transparencies. Refer to pages 128 and
129.
BMake sure that you load specialty media only in the multi-purpose tray and that you
set the media thickness switch to the correct setting for the media used.
If a media jam occurs, the printer panel reports Jam at <Location>. The <Locations>
are the various sensors throughout the paper path, listed as A through E.
The following illustration shows the locations of the sensors that report media jams
(A through E).
Jam at A
Jam at C
Jam at D
Jam at E
Jam at MPT
( ☞ P. 81-82)
( ☞ P. 84-87)
( ☞ P. 88-89)
( ☞ P. 90)
( ☞ P. 91)
Jam at B
( ☞ P. 83)
2nd cassette feeder (option)