Operating instructions

38
Setting up the Printer
Transparencies automatically feed from the MP tray. Some brand of transparencies may require
manual feeding. The MP tray is a tray that holds the transparencies of A4 or Letter, including up to
30 sheets.
NOTES
• Use only transparencies recommended for use in laser printers.
• The recommended transparency is 3M CG3300. If the print quality is poor, try printing on the
other side.
• Place transparencies on a flat surface to cool after removing them from the printer.
• You cannot load transparencies from the cassettes. Use the MP tray for loading transparencies.
For the MP tray, load the transparencies with side-to-be-printed facing up, and the top toward the
printer.
NOTES
• Because transparencies are heavier than paper, do not load the trays to capacity.
• Remove each transparency from the output bin before printing another.
• Select “TRANSPARENCY” from Paper Type List Box of the printer driver.
For transparency specifications, see page page 203.
Loading transparencies in the MP tray
Printing side (up)