Operating instructions

Filling Wedge
Setting: WG radius, start angle, sweep angle(,chord angle;)
Parameter : radius start angle
Format : current units clamped real
Range : -2
30
to 2
30
-1 -32768 to 32767
Default : no default no default
Parameter : sweep angle chord angle
Frmat : clamped real clamped real
Range :
±360°
0.5° to 180°
Default : no default 5°
This command fills a specified wedge.
• Radius
Specifies the distance between the current location and the starting point of the
wedge's arc.
The wedge is a portion of a circle, and the radius parameter indicates a radius of
a circle.
The printer interprets coordinates in user units when scaling is on and in plotter
units when scaling is off.
The sign (+) or (-) of the radius parameter determines a start position of the start
angle (zero degree).