Operating Instructions
Table Of Contents
- Important Information
- Table of Contents
- Introduction and Installation
- Preparation
- Printer
- Scanner
- Copier
- Fax (KX-MB771 only)
- Sending Faxes
- Receiving Faxes
- 6.6 Selecting the way to use your fax machine
- 6.7 Receiving a fax automatically – Auto answer ON
- 6.8 Receiving a fax manually – Auto answer OFF
- 6.9 Using the unit with an answering machine
- 6.10 Receive polling (retrieving a fax placed on another fax machine)
- 6.11 Junk fax prohibitor (preventing fax reception from undesired callers)
- 6.12 Receiving a fax into your computer
- Caller ID (KX-MB771 only)
- Programmable Features
- Useful Information
- Help
- Paper Jams
- Cleaning
- General Information
- Index
2. Preparation
19
2.7 Your logo (KX-MB771 only)
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
1 {MENU} i {#}{1}{0}{2} i {SET}
LOGO=|
2 Enter your logo, up to 30 characters (see page 54 for
character entry). i {SET}
3 Press {MENU} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
character, and make the correction.
L To erase all characters, press and hold {STOP}.
2.8 Your fax number (KX-MB771
only)
You can program your fax number so that it appears on
the top of each page sent.
1 {MENU} i {#}{1}{0}{3} i {SET}
NO.=|
2 Enter your fax number, up to 20 digits.
L To enter a “+”, press {*}.
L To enter a space, press {#}.
L To enter a hyphen, press {RECALL}.
L To erase a number, press {STOP}.
3 {SET}
4 Press {MENU} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
L To erase all numbers, press and hold {STOP}.
{<}{>}
{SET}
{MENU} {STOP}
{<}{>}
{SET} {RECALL}
{MENU} {STOP}
MB261_771E-PFQX2753ZA-OI-en.book Page 19 Monday, June 25, 2007 2:47 PM