Operating Instructions
Table Of Contents
- Important Information
- Table of Contents
- Introduction and Installation
- Preparation
- Connections and Setup
- Document Requirements
- Help
- Volume
- Initial Programming
- Printer
- Scanner
- Scanner
- 4.1 Scanning from the unit (Push Scan)
- 4.1.1 Scan to Multi-Function Viewer
- 4.1.2 Scan to save as a file
- 4.1.3 Scan to Email
- 4.1.4 Scan to OCR
- 4.1.5 Scan to email address (KX-MB2000/KX-MB2010/KX-MB2030, LAN connection only)
- 4.1.6 Scan to FTP server (KX-MB2000/KX-MB2010/KX-MB2030, LAN connection only)
- 4.1.7 Scan to SMB folder (KX-MB2000/KX-MB2010/KX-MB2030, LAN connection only)
- 4.2 Scanning from a computer (Pull Scan)
- 4.1 Scanning from the unit (Push Scan)
- Scanner
- Copier
- Fax (KX-MB2025/KX-MB2030 only)
- Sending Faxes
- Receiving Faxes
- 6.6 Selecting the way to use your unit
- 6.7 Receiving a fax automatically – Auto answer ON
- 6.8 Receiving a fax manually – Auto answer OFF
- 6.9 Using the unit with an answering machine
- 6.10 Receive polling (retrieving a fax placed on another fax machine)
- 6.11 Junk fax prohibitor (preventing fax reception from undesired callers)
- 6.12 Receiving a fax on your computer
- 6.13 Web fax preview (KX-MB2030, LAN connection only)
- Caller ID (KX-MB2025/KX-MB2030 only)
- Programmable Features
- Useful Information
- Help
- Reports and Displays
- Troubleshooting
- 10.3 When a function does not work
- 10.3.1 General
- 10.3.2 Printing problems
- 10.3.3 Scanner
- 10.3.4 Copier
- 10.3.5 Fax (KX-MB2025/KX-MB2030 only)
- 10.3.6 Network (KX-MB2000/KX-MB2010/KX-MB2030, LAN connection only)
- 10.3.7 Using an answering machine (KX-MB2025/KX-MB2030 only)
- 10.3.8 If a power failure occurs
- 10.3.9 Firewall setting tool for Microsoft Windows XP Service Pack 2 or later/Windows Vista users (KX-MB2000/KX-MB2010/KX-MB2030, LAN connection only)
- 10.3.10 Notice for KX-MB200/KX-MB700/KX-FLB880 series users
- 10.3 When a function does not work
- Paper Jams
- Cleaning
- General Information
- Index
Feature/Code Selection
Setting the PC information for
notification of fax reception
(KX-MB2030 only, LAN
connection only)
R This feature can be
programmed only through
the web browser interface.
Select the PC to send fax reception notification message to (up to 6
destinations).
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 56). A [OK]
4. Select the [FAX FEATURE] tab.
5. Click [Edit] next to [RECEIVE PC LIST].
6. Click [List] next to the desired destination.
7. Click the desired PC from the list. A [Submit]
8. Close the web browser.
64
8. Programmable Features