Operating Instructions Multi-Function Printer Model No. KX-MB1500 KX-MB1520 KX-MB1530 The pictured model is KX-MB1500. Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup of Multi-Function Station (CD-ROM). For hearing or speech impaired TTY users, TTY: 1-877-833-8855 KX-MB1520/KX-MB1530 only: R This unit is compatible with Caller ID. Subscription to the appropriate service through your service provider/telephone company is required.
Thank you for purchasing a Panasonic product. You can select the English or Spanish language. The display and reports will be in the selected language. The default setting is English. If you want to change the setting, see feature #110 on page 50. Caution: R Do not rub or use an eraser on the printed side of the recording paper, as the print may smear. Notice for product disposal, transfer, or return (KX-MB1520/KX-MB1530 only): R This product can store your private/confidential information.
Important Information For your safety For best performance Laser radiation Toner cartridge CLASS 1 LASER PRODUCT R The printer of this unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser diode properties Laser output : Max.
Important Information R The unit should not be exposed to direct sunlight. R Do not place heavy objects on top of the unit. When you leave the unit unused for a long period of time, unplug this unit from the power outlet. R The unit should be kept away from heat sources such as heaters, kitchen stoves, etc. Damp basements should also be avoided. R Do not cover slots or openings on the unit. Inspect the air circulation vents regularly and remove any dust build-up with a vacuum cleaner (A).
Table of Contents 1. Introduction and Installation Accessories 1.1 1.2 Supplied accessories ....................................7 Accessory information ...................................7 Finding the Controls 1.3 1.4 Button descriptions ........................................8 Overview .......................................................9 Installation 1.5 1.6 1.7 1.8 Toner cartridge ............................................10 Connections ................................................
Table of Contents 11.2 Display messages .......................................66 Troubleshooting 11.3 When a function does not work ...................69 12. Paper Jams Jams 12.1 Recording paper jam ...................................75 12.2 Document jams (Automatic document feeder) (KX-MB1530 only) .......................................78 13. Cleaning Cleaning 13.1 Cleaning the white plate and glass .............80 13.2 Cleaning the document feeder rollers (KX-MB1530 only) ............................
1. . Introduction and Installation 1. Introduction and Installation 1.
1. Introduction and Installation 1.3 Button descriptions AB C MMuteN (KX-MB1520/KX-MB1530 only) R To mute your voice during a conversation. Press again to resume the conversation. MSP-PhoneN (KX-MB1520/KX-MB1530 only) R To make or receive phone calls. Navigator key D E F G H I J K LM N O * The pictured model is KX-MB1520/KX-MB1530. MQualityN R To select the contrast (page 31) and resolution (page 31) when copying.
1. Introduction and Installation Document entrance (KX-MB1530 only) 1.4 Overview Document exit (KX-MB1530 only) Document guides (KX-MB1530 only) 1.4.1 Front view Document cover A B C H Document sub tray (KX-MB1530 only) Recording paper guides Paper input tray Front cover External telephone jack (KX-MB1520/KX-MB1530 only) Telephone line jack (KX-MB1520/KX-MB1530 only) J KL 1.4.2 Rear view A MN * The pictured model is KX-MB1520.
1. Introduction and Installation 3 Detach the orange protective cover (A) from the 1.5 Toner cartridge The supplied toner cartridge is a starter toner cartridge. Caution: R Read the following instructions before you begin installation. After you have read them, open the toner cartridge protective bag. The toner cartridge contains a photosensitive drum. Exposing it to light may damage the drum. – Do not expose the toner cartridge to light for more than 5 minutes.
1. Introduction and Installation 5 Hold the toner cartridge (A) by the center handle, then insert firmly to lock into place. Note: R To ensure that the unit operates properly, we recommend the use of Panasonic toner cartridge. See page 7 for accessory information. Waste disposal method Waste material should be disposed of under conditions which meet all national and local environmental regulations.
1. Introduction and Installation 1.6 Connections Caution: R When you operate this product, the power outlet should be near the product and easily accessible. Note: R Do not place any objects within 10 cm (4 inches) of the right and left sides of the unit. R Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating.
1. Introduction and Installation 1.7 Turning the power ON 1.8 Recording paper Turn the power switch to the ON position (A). Note for recording paper: R We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities.
1. Introduction and Installation R The unit is set for printing letter-size plain paper by default. – To use other paper sizes, change the recording paper size setting (feature #380 on page 52). – To use thin paper, change the recording paper type setting (feature #383 on page 53). 3 Load the paper, print-side down (A). Important: R Push down to lock the plate (B) in the paper input tray, if necessary. A 1 Lift the paper input tray (A), and pull it completely out.
1. Introduction and Installation 5 Insert the paper input tray into the unit. R After use, pull up the paper exit, and then replace the tab (A) to the original position. A Note: R If the paper is not loaded correctly, re-adjust the paper guides, or the paper may jam. R If the paper input tray does not close, the plate in the paper input tray may not be in the locked position. Push the paper down and make sure that the paper is laying flat in the paper input tray.
1. Introduction and Installation Therefore, if you print with the cover closed, the paper may jam inside the unit. 1.8.2 Manual input tray You can use the manual input tray for printing with the computer and for copying. It can hold one page at a time. When printing or copying multiple pages, add the next page after the first page has been fed into the unit. R Please refer to page 83 for information on recording paper. R When printing with the computer, custom size recording paper can also be used.
2. . Preparation 2. Preparation 2.1 Dialing mode (KX-MB1520/ KX-MB1530 only) If you cannot dial (page 38), change this setting according to your telephone line service. MMenuN 2.2 Selecting the operation mode (Scan/Copy) (Fax: KX-MB1520/ KX-MB1530 only) You can select the desired mode by pressing the following button repeatedly. MSetN 1 MMenuN 2 Press MBNM1NM2NM0N to display “DIALING MODE”. 3 Press M1N or M2N to select the desired setting. M1N “PULSE”: For rotary/pulse dial service.
2. Preparation 2.3 Setting the original 2.3.2 Using the automatic document feeder (KX-MB1530 only) 2.3.1 Using the scanner glass 1 Open the document sub tray (A) by pressing its center part (B). A A B B 1 Open the document cover (A). 2 Place the document FACE DOWN on the scanner glass (B), aligning the top left of the document with the corner where the mark is positioned. 3 Close the document cover. Note: R Confirm that there are no documents in the automatic document feeder (KX-MB1530 only).
2. Preparation R R R R R R R 356 mm (14") R Maximum document size 216 mm (8 1/2") Effective scanning area 4 mm (5/32") 4 mm (5/32") 4 mm (5/32") 4 mm (5/32") 208 mm (8 216 mm 3/ ") 16 (8 1/2") R Shaded area will be scanned. R When using the unit as a scanner (page 28, 29), the effective scanning length depends on the selected paper size.
2. Preparation 2.4 Adjusting the volume (KX-MB1520/KX-MB1530 only) 2.5 Date and time (KX-MB1520/ KX-MB1530 only) Important: R Before adjusting the volume, set the operation mode to fax mode. If the MFaxN light is OFF, turn it ON by pressing MFaxN repeatedly. We recommend you to set the date and time. The other party will receive your unit’s date and time as the header information. MMenuN MSetN MCNMDN MFaxN MSetN MFNMEN MFaxN Ringer volume While the unit is idle, press MCN or MDN.
2. Preparation 2.6 Your logo (KX-MB1520/ KX-MB1530 only) 2.7 Your fax number (KX-MB1520/ KX-MB1530 only) You can program your logo (name, company name, etc.) so that it appears on the top of each page sent. You can program your fax number so that it appears on the top of each page sent. MStopN MMenuN MStopN MMenuN MSetN MFNMEN 1 MMenuN A MBNM1NM0NM2N A MSetN 2 Enter your logo, up to 30 characters (see page 62 for character entry). A MSetN 3 Press MMenuN to exit.
2. Preparation 2.8 Installing Multi-Function Station 2.8.
2. Preparation 6 Connect the unit to a computer with the USB cable (A), then click [Next]. 2. [Modify] A [Add Multi-Function Station Driver]. Then follow the on-screen instructions. Note: R You cannot connect more than one unit to the same computer at the same time. To modify the software (To add or uninstall each component) A R If the unit is connected to your computer, the model name will be automatically detected. R You can change the name of the unit if necessary.
2. Preparation 2.9 Starting Multi-Function Station [Start] A [All Programs] or [Programs] A [Panasonic] A the unit’s name A [Multi-Function Station] R Multi-Function Station will appear. [ ] R To display usage tips. [ ] R To display information about Multi-Function Station. Note: R You can confirm if the unit is connected to your computer by using Device Monitor (page 63). R Computer features (printing, scanning, etc.
2. Preparation For Windows Vista: 1. [Start] A [Control Panel] A [Internet Options] A [Programs] A [Set programs] A [Set program access and computer defaults] R If the [User Account Control] dialog box appears, click [Continue]. 2. [Custom] 3. Select the desired MAPI-compliant Email software such as [Windows Mail], etc. from [Choose a default e-mail program]. A [OK] For Windows 7: 1.
3. . Printer 3. Printer 3.1 Printing from Windows applications You can print a file created in a Windows application. For example, to print from WordPad, proceed as follows: 1 Open the document you want to print. 2 Select [Print...] from the [File] menu. R The [Print] dialog box will appear. For details about the [Print] dialog box, click [?], then click the desired item. Setting the printer properties You can change the printer setting in step 3.
3. Printer – – – Labels that are wrinkled, damaged or separated from the backing sheet. Any sheet of labels that has spaces in it where some of the labels have been removed. Labels that do not completely cover the backing sheet as follows: 6 R To save the file in PDF format, see page 27. R Even if you set the number of prints on the original application beforehand, you may have to re-set it for the Easy Print Utility. Click [Print] icon on the print toolbar. R The unit will start printing. 3.2.
4. . Scanner 4. Scanner 4.1 Scanning from the unit (Push Scan) You can easily scan the document by using the operation panel on the unit. You can select one of the following scanning modes depending on how you intend to use the scanned image.
4. Scanner 4.2 Scanning from a computer (Pull Scan) Note: R When scanning a document, we recommend using the scanner glass rather than the automatic document feeder for better results (KX-MB1530 only). R Do not open the document cover when scanning a document with the automatic document feeder (KX-MB1530 only). 4.2.1 Using Multi-Function scan application By clicking an application icon, the selected application starts automatically after scanning. 1 Set the original (page 18).
4. Scanner The [Select...] button will not be displayed when there is only one printer driver installed.
5. . Copier 5. Copier 5.1 Making a copy 5.1.1 Using the scanner glass MCopyN To select the copy size 1. Press MCopy SizeN repeatedly to select “ORIGINAL SIZE”. 2. Press MCN or MDN repeatedly to select the size of your original document. A MSetN 3. Press MCN or MDN repeatedly to select the size of recording paper size. R When “#2” is selected, you can change the recording paper size by pressing MEN repeatedly. R The appropriate zoom rate will be set automatically.
5. Copier 5.1.2 Using the automatic document feeder (KX-MB1530 only) 5.2 More copying features R Make sure that the MCopyN light is ON. 5.2.1 Zoom copy (enlargement / reduction) 1 Set the original (page 18). 2 Press MZoomN repeatedly to select the zoom rate that MCopyN fits the size of your document and recording paper. – “ZOOM =100%”*1 – “50%” – “200%” *1 Press MCN or MDN repeatedly to change the zoom rate by 1 % at a time from “25%” to “400%”.
5. Copier Example: 150 % enlarged copy Using the scanner glass (A): Original document 2. Place the next document on the scanner glass and press MSetN. Repeat this until you have scanned all pages, and then press MStartN. R The unit will start copying. Enlarged copy 8 A Using the automatic document feeder (KX-MB1530 only): Original document When using the automatic document feeder (KX-MB1530 only): MStartN After you finish copying, press MStopN to reset this feature.
5. Copier R The scanning area changes according to the selected setting in step 4. See the following table for details. The shaded area will be scanned. Original document Page layout “4 in 1” “LANDSCAPE” 2 Press MPage LayoutN repeatedly to select “PAGE LAYOUT”. 3 Press MCN or MDN repeatedly to select “QUIK ID COPY” or “IMAGE REPEAT”. A MSetN “PORTRAIT” 4 Press MCN or MDN repeatedly to select the number of original documents from “2 in 1”, “4 in 1” or “8 in 1”.
5. Copier Original document Page layout “8 in 1” 1 Set the original (page 18). R To make a portrait copy, set the original in portrait direction. To make a landscape copy, set the original in landscape direction. 2 Press MPage LayoutN repeatedly to select “PAGE LAYOUT”. 3 Press MCN or MDN repeatedly to select “N in 1”. A MSetN 4 Press MCN or MDN repeatedly to select the number of original documents from “2 in 1”, “4 in 1” or “8 in 1”.
5. Copier Original document Page layout 5 Enter the desired edge width of long edge using the “8 in 1” “PORTRAIT” 6 Press MCN or MDN repeatedly to select “SHORT dial keypad. A MSetN EDGE”. A MSetN 7 Enter the desired edge width of short edge using the dial keypad. A MSetN “LANDSCAPE” 8 If necessary, enter the number of documents (up to 99). A MStartN 9 After you finish copying, press MStopN to reset this feature. Note: R You can hold the previous edge setting (feature #473 on page 59).
5. Copier – while the unit is printing received fax documents (KX-MB1520/KX-MB1530 only). 1 Set the original (page 18). 2 While “PC PRINTING” or “PRINTING” (KX-MB1520/KX-MB1530 only) is displayed, switch to copy mode by pressing MCopyN repeatedly (page 17), then press MStartN. 3 Make necessary settings such as number of copies, resolution, zoom features and page layout features. A MStartN R “COPY RESERVED” will be displayed. The unit will start copying after the current printing job.
6. . Fax (KX-MB1520/KX-MB1530 only) 6. Fax (KX-MB1520/KX-MB1530 only) 6.1 Sending a fax manually 6.1.1 Using the scanner glass By using the scanner glass, you can send a page from booklets or small size paper. glass by pressing MStartN, and then M1N (To receive a fax, press M2N). R You can change the default operation mode (feature #463 on page 53) and the timer before returning to the default operation mode (feature #464 on page 53).
6. Fax (KX-MB1520/KX-MB1530 only) Printing a confirmation report A confirmation report provides you with a printed record of transmission results. To print the confirmation reports, make sure that feature #401 is activated (page 55). For an explanation of the messages, see page 65. Printing a journal report A journal report provides you with a printed record of the 30 most recent faxes. To print it manually, see page 82.
6. Fax (KX-MB1520/KX-MB1530 only) 6.3 Sending a fax using phonebook Before using this feature, store the desired names and telephone numbers into the phonebook (page 39). R Make sure that the MFaxN light is ON. 6.4 Sending an electronic document as a fax message from your computer 6.3.1 Using the scanner glass You can access the fax function from a Windows application using Multi-Function Station. For example, to send a document created from WordPad, proceed as follows. 1 Set the original (page 18).
6. Fax (KX-MB1520/KX-MB1530 only) – [Do not enter a fax number directly]: You can only select fax numbers stored in the phonebook. – [Re-enter to confirm the fax number]: When entering the fax number using the dial keypad display, re-entry of the number is required. 4. [OK] Note: R For details about each function, click [Help]. 6.5 Receiving a fax automatically : Auto answer ON R A4 or letter size recording paper can be used. 6.5.
6. Fax (KX-MB1520/KX-MB1530 only) 6.6 Receiving a fax manually : Auto answer OFF R A4 or letter size recording paper can be used. 6.6.1 Activating TEL mode Press MFax Auto AnswerN repeatedly to display “TEL MODE”. R The MFax Auto AnswerN light turns OFF. Fax Auto Answer MSP-PhoneN MStartN * The pictured model is KX-MB1520. Note: R If you do not answer the call within 10 rings, the unit will temporarily switch to fax reception. The other party can then send a fax.
6. Fax (KX-MB1520/KX-MB1530 only) 6.7 Using the unit with an answering machine 6.7.1 Setting up the unit and an answering machine 1 Connect the answering machine (A). R Answering machine is not supplied. The illustration is just an example. R Remove the stopper (B) if attached. – – the fax activation code (feature #434 on page 57) remote access to your phone company’s Voice Mail (if you subscribed) Note: R If the call is a phone call, the answering machine will record voice messages.
6. Fax (KX-MB1520/KX-MB1530 only) 6.8 Junk fax prohibitor (preventing fax reception from undesired callers) If you subscribe to Caller ID service (page 46), this feature prevents fax reception from calls that do not show caller information. Additionally, the unit will not accept faxes originating from numbers that match the ones on a programmable junk fax prohibitor list. Important: R This feature does not work if you receive faxes manually. 6.8.
6. Fax (KX-MB1520/KX-MB1530 only) 6.9 Receiving a fax on your computer You can receive a fax document on your computer. The received fax document is saved as an image file (TIFF-G4 format). Important: R Make sure the PC fax setting is set to “ALWAYS” or “CONNECTED” beforehand (feature #442 on page 58). 1 Press MFax Auto AnswerN repeatedly to turn the auto answer setting ON (page 41). 2 Start Multi-Function Station.
7. . Caller ID (KX-MB1520/KX-MB1530 only) 7. Caller ID (KX-MB1520/KX-MB1530 only) 7.1 Caller ID service This unit is compatible with the Caller ID service offered by your local telephone company. To use this unit’s Caller ID features, you must subscribe to a Caller ID service. Make sure the following ring count is set to 2 or more rings beforehand. – FAX ring count (feature #210 on page 52) R The name display service may not be available in some areas.
7. Caller ID (KX-MB1520/KX-MB1530 only) 2 MSetN R To cancel erasing, press MStopN, then MMenuN. 3 MSetN A MStopN 7.3.2 Erasing specific caller information R Make sure that the MFaxN light is ON. 1 MCaller IDN 2 Press MCN or MDN repeatedly to display the desired item. A MFN A MSetN A MStopN 7.4 Storing caller information into the phonebook R Make sure that the MFaxN light is ON. 1 MCaller IDN 2 Press MCN or MDN repeatedly to display the desired item. 3 MMenuN 4 Press MFN or MEN.
8. . Distinctive Ring (KX-MB1520/KX-MB1530 only) 8. Distinctive Ring (KX-MB1520/KX-MB1530 only) 8.1 Distinctive Ring service When a call is made to one of your phone numbers, the telephone company sends a ring pattern to your telephone line to indicate which number the call is intended for. By setting up this unit for Distinctive Ring, you can make the unit automatically start fax reception when a call comes to the fax number.
9. Programmable Features 9.1 Programming MMenuN 9. . Programmable Features MSetN 1 MMenuN 2 Press MBN and the 3-digit code (page 50 to page 61). 3 Press the appropriate selection to display the desired setting. R This step will vary depending on the feature. 4 MSetN 5 Press MMenuN to exit.
9. Programmable Features 9.2 Basic features Feature/Code Selection Setting the quick setup MBNM1NM0NM0N (KX-MB1520/KX-MB1530 only) You can print out the quick fax setup guide and select the desired receiving mode depending on your situation. M1N “FAX ONLY” (default): Use only as a fax (page 41). M2N “DIST. RING”: With the Distinctive Ring service (page 48). M3N “EXT. TAM”: With an external telephone answering machine (page 43). M4N “EXT. TEL”: Mostly phone calls (page 42). 1. MMenuN A MBNM1NM0NM0N 2.
9. Programmable Features Feature/Code Selection Setting the ADSL mode MBNM1NM2NM4N (KX-MB1520/KX-MB1530 only) When you use a DSL/ADSL line, this feature improves the reliability by reducing the transmission speed. M0N “OFF” (default) M1N “ON” Note: R Calling charges may be higher than usual.
9. Programmable Features Feature/Code Selection Setting the beep sounds and keytones MBNM1NM6NM5N M0N “OFF”: Deactivates this feature. M1N “ON” (default): You will hear confirmation/error beep sounds and keytones. Setting the off-hook alert MBNM1NM7NM1N (KX-MB1520/KX-MB1530 only) To alert you with a beeping sound when the telephone line has been left off-hook for more than 1 minute without dialing. M0N “OFF”: Deactivates this feature.
9. Programmable Features Feature/Code Selection Setting the recording paper size in the manual input tray MBNM3NM8NM1N M1N “LETTER” (default): Letter-size paper M2N “A4”: A4-size paper M3N “LEGAL”: Legal-size paper M4N “B5(ISO)”: B5(ISO)-size paper M5N “B5(JIS)”: B5(JIS)-size paper M6N “16K”: 16K-size paper M7N “8.5X13” M8N “8.5X13.4” Note: R When you set feature #147 to “MILLIMETERS”, the numbers are displayed in millimeters.
9. Programmable Features Feature/Code Selection Setting toner save feature MBNM4NM8NM2N M0N “OFF” (default): Deactivates this feature. M1N “ON”: The toner cartridge will last longer. Note: R This feature may lower the print quality by reducing toner consumption. R This setting is valid for copying, and when the unit prints reports/lists. R This setting is invalid for printing received faxes (KX-MB1520/KX-MB1530 only).
9. Programmable Features 9.3 Fax features (KX-MB1520/KX-MB1530 only) Feature/Code Selection Erasing all items stored in the phonebook MBNM2NM8NM9N M0N “NO” (default) M1N “YES” R Disconnect the telephone line cord and USB cable before activating this feature. To erase all items: 1. MMenuN A MBNM2NM8NM9N 2. Press M1N to select “YES”. A MSetN 3. Press M1N to select “YES”. A MSetN A MMenuN Printing a confirmation report MBNM4NM0NM1N M0N “OFF”: Confirmation reports will not be printed.
9. Programmable Features Feature/Code Selection Sending a fax at a specific time MBNM4NM1NM2N This feature allows you to take advantage of low-cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time. M0N “OFF” (default) M1N “ON” To send a document: 1. If the MFaxN light is OFF, turn it ON by pressing MFaxN repeatedly. 2. Set the original (page 18). 3. If necessary, change the contrast (page 38) and the resolution (page 38). 4.
9. Programmable Features Feature/Code Selection Setting dial keypad entry restriction MBNM4NM2NM1N M0N “OFF” (default): Deactivates this feature. M1N “ON”: If you do not wish to dial a fax number manually using the dial keypad, activate this feature. Note: R If you select “ON”, you cannot make redial calls to fax numbers entered using the dial keypad. R If you select “ON”, the fax number re-entry setting (feature #422 on page 57) will be deactivated.
9. Programmable Features Feature/Code Selection Setting friendly reception MBNM4NM3NM8N To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep). M0N “OFF”: You have to press MStartN, and then M2N for fax reception. M1N “ON” (default): You do not have to press MStartN, and then M2N for fax reception. Receiving a fax into the computer MBNM4NM4NM2N If you wish to receive a fax into a computer, activate this feature and run [PC FAX] from Multi-Function Station.
9. Programmable Features 9.4 Copy features Feature/Code Selection Setting the input tray to use for copy MBNM4NM6NM0N M1N “#1” (default): The paper input tray is selected. The displayed paper size depends on the recording paper size setting (feature #380 on page 52). M2N “#2”: The manual input tray is selected. The displayed paper size depends on the recording paper size setting (feature #381 on page 53).
9. Programmable Features 9.5 PC print features Feature/Code Selection Changing the data timeout setting MBNM7NM7NM4N The unit will automatically print the remaining data in memory when the computer does not send data to the unit during the set time. 1. MMenuN A MBNM7NM7NM4N A MSetN 2. Enter the desired data timeout setting from “005” seconds to “600” seconds, using the dial keypad. R The default setting is “060” seconds. 3.
9. Programmable Features 9.6 Scan features Feature/Code Selection Setting the scan mode for Push Scan MBNM4NM9NM3N M1N “VIEWER” (default): The scanned image will be displayed in the [Multi-Function Viewer] window. M2N “FILE”: The scanned image will be saved as a file. M3N “EMAIL”: The scanned image will be saved for email attachment. M4N “OCR”: The scanned image will be displayed in the OCR window. Note: R The OCR software is not supplied.
10. . Useful Information 10. Useful Information 10.1 Character entry (KX-MB1520/ KX-MB1530 only) The dial keypad is used to enter characters and numbers. – Press MFN or MEN to move the cursor. – Press the dial keys to enter characters and numbers. – Press MStopN to erase the character or number highlighted by the cursor. Press and hold MStopN to erase all characters or numbers.
10. Useful Information 10.2.2 Using Device Monitor 10.3 Canceling the operations You can confirm the setting information and current status of the unit from your computer. You can cancel the current operation from the unit. You can also select the desired operation to cancel. 1 Start Multi-Function Station. 2 [Utilities] A [Device Monitor] R The [Device Monitor] window will appear. 3 Confirm the status of the unit.
10. Useful Information 10.4 Reordering the document (KX-MB1530 only) The order of multiple page documents will be reversed after being fed into the automatic document feeder. You can return the documents to their original order by passing the documents through the feeder again. 1 Press MMenuN repeatedly to display “DOC. REORDERING”. 2 Insert the document FACE DOWN into the automatic document feeder. A MStartN R To cancel reordering, press MStopN.
11. Help 11.1 Report messages (KX-MB1520/KX-MB1530 only) 11. . Help To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the confirmation and journal reports (page 39). Message Code COMMUNICATION ERROR 40-42 46-72 FF Cause & Solution R A transmission or reception error occurred. Try again or check with the other party. 43 44 R A line problem occurred. Connect the telephone line cord to a different jack and try again.
11. Help 11.2 Display messages To indicate the unit’s status, one or more of the following messages will appear on the display. Display Cause & Solution “CALL SERVICE” R There is something wrong with the unit. Contact our service personnel. “CHANGE CARTRIDGE” R The toner cartridge is not inserted properly. Re-insert it correctly (page 10). R There is something wrong with the toner cartridge. Replace the toner cartridge. “CHECK CARTRIDGE” R The toner cartridge is not inserted properly.
11. Help Display Cause & Solution “KEEP COPYING” R Copying has stopped due to some existing problem (Example: a lack of recording paper or a recording paper jam). See the other displayed message instructions to continue copying. “LOW TEMP.” R The inside of the unit is extremely cold and cannot be operated. Use the unit in a warmer area. “MEMORY FULL” R When performing memory transmission, the document being stored exceeded the memory capacity of the unit. Send the entire document manually.
11. Help Display Cause & Solution “TRANSMIT ERROR” R A transmission error occurred. Try again. 68 For assistance, please visit http://www.panasonic.
11. Help 11.3 When a function does not work 11.3.1 General Problem Cause & Solution The unit does not work. R Check the connections (page 12, 23). The recording paper exit becomes full quickly or the recording paper does not stack properly on the recording paper exit. R High humidity may cause the recording paper to curl. Try turning the paper over and re-inserting it. If the curl on the paper is heavy, please remove it from the recording paper exit.
11. Help Problem Cause & Solution I forgot the password for feature programming via remote operation. R You may have changed the feature programming password. If you do not remember it, assign a new password using feature #155 (page 51). When required to enter the current password, enter “0101” instead. The unit is beeping the off-hook alert (KX-MB1520/ KX-MB1530 only). R Press MStopN to stop the beeping sound.
11. Help 11.3.3 Scanner Problem Cause & Solution I cannot scan. R When scanning at a high resolution, a large amount of available memory is required. If your computer warns that there is insufficient memory, close other applications and try again. R Select a lower resolution and try again. R Reduce the scanning area and try again. 1. To preview the scanned image, click [Preview]. 2. You can drag the frame to specify the scanning area. 3. Click [Scan] to start scanning. R The unit is in use.
11. Help Problem Cause & Solution The other party complains that letters on their received document are distorted. R If your line has special telephone services such as call waiting, the service may have been activated during fax transmission. Connect the unit to a line that does not have these services. R Another telephone on the same line is off the hook. Hang up the extension telephone and try again. The other party complains about the quality of their received documents. R Try copying the document.
11. Help Problem Cause & Solution I cannot select the desired receiving mode. R If you want to set FAX ONLY mode: – press MFax Auto AnswerN repeatedly to turn ON the MFax Auto AnswerN light. R If you want to set TEL mode: – press MFax Auto AnswerN repeatedly to turn OFF the MFax Auto AnswerN light. R The Distinctive Ring of feature #430 is activated (page 48). When an extension telephone is connected, I cannot receive documents by pressing MGNMBNM9N.
11. Help Problem Cause & Solution I pressed the remote access code to access the answering machine remotely, but the line was disconnected. R The code may include “#” which is used for certain features provided by telephone companies. Change the code on the answering machine to another number which does not include “#”. Callers complain that they cannot send a document. R There is no room left in the memory of your answering machine to record voice messages.
12. . Paper Jams 12. Paper Jams 12.1 Recording paper jam 2. Push down both green levers (A) until they stop. 12.1.1 When the recording paper has jammed inside of the unit The display will show the following: – “PAPER JAMMED” L “OPEN REAR COVER” “OPEN FRONT COVER” Caution: R Do not open the paper input tray before opening the front and rear covers as the jammed paper may be pulled and the jam may get worse. A 3. Remove the jammed paper (A) carefully by pulling it toward you.
12. Paper Jams 4. Push up the green levers (A) to the original position. 2. Remove the jammed paper (A) carefully by pulling it toward you. A A 5. Close the rear cover. R If the recording paper has jammed behind the toner cartridge, remove the toner cartridge (A) first, and remove the jammed paper (B). Then reinsert the toner cartridge into the unit. A R Open and close the front cover to clear the error message. Case 2: When the recording paper has jammed inside the front cover: 1.
12. Paper Jams 3. Close the front cover. 12.1.2 When the recording paper is not fed into the unit properly The display will show the following: – “CHECK PAPER #1 PRESS START” 1 Pull the paper input tray completely out. 2 Re-load the recording paper. 3 Insert the paper input tray into the unit. Note: R If the message is still displayed, check the recording paper specifications and load the recording paper again. See page 13 for details. 12.1.
12. Paper Jams 12.2 Document jams (Automatic document feeder) (KX-MB1530 only) The display will show the following: – “REMOVE DOCUMENT” Caution: R Do not pull out the jammed document forcibly before lifting the ADF cover. R Be careful not to damage the transparent plastic sheets (A). A 78 1 Open the ADF cover (A) while holding the document cover (B).
12. Paper Jams 2 Remove the jammed document (A) carefully. When the document has jammed near the document entrance: 3 Close the ADF cover. A MStopN R Press MStopN to clear the message. When the document has jammed near the document exit: A R If you cannot remove the jammed document (A), open the document cover, remove the document, then close the document cover.
13. . Cleaning 13. Cleaning 13.1 Cleaning the white plate and glass Clean the white plate and glass when a black line, a white line or a dirty pattern appears on: – your recording paper, – the original document, – the scanned data, or – the fax document received by the other party (KX-MB1520/KX-MB1530 only). 2 Hold the document cover while cleaning the white plate (A) and the scanner glass (B). KX-MB1500/KX-MB1520: A B Caution: R Do not use paper products, such as paper towels or tissues for cleaning.
13. Cleaning 13.2 Cleaning the document feeder rollers (KX-MB1530 only) 4 Close the ADF cover. Clean the rollers when documents frequently misfeed, or when a line or a dirty pattern appears on documents. Caution: R Do not use paper products, such as paper towels or tissues for cleaning. 1 Turn the power switch OFF. 2 Open the ADF cover (A) while holding the document cover (B). A B 5 Turn the power switch ON.
14. . General Information 14. General Information 14.1 Reference lists and reports You can print out the following lists and reports for your reference. – “SETUP LIST” – “TEL NO. LIST”*1 – – “JOURNAL REPORT”*1 “PRINTER TEST” – “CALLER ID LIST”*1 *1 KX-MB1520/KX-MB1530 only 14.2 Specifications n Applicable lines*1: Public Switched Telephone Network n Document size: Scanner glass: Max. (width ´ length) 216 mm ´ 297 mm (8 1/2" ´ 11 11/16") Automatic document feeder (KX-MB1530): Max.
14. General Information n Dimensions: KX-MB1500/KX-MB1520: Approx. (width ´ depth ´ height) 380 mm ´ 360 mm ´ 203 mm (14 15/16" ´ 14 3/16" ´ 8") KX-MB1530: Approx. (width ´ depth ´ height) 391 mm ´ 360 mm ´ 242 mm (15 3/8" ´ 14 3/16" ´ 9 1/2") ITU-T No.1 Test Chart n Mass (Weight): KX-MB1500/KX-MB1520: Approx. 9 kg (20 lb) KX-MB1530: Approx. 9.5 kg (21 lb) n Power consumption: Standby: Approx. 3.3 W (KX-MB1500) Approx. 3.6 W (KX-MB1520) Approx. 4 W (KX-MB1530) Preheat: Approx. 55 W Copy: Approx.
14. General Information Toner cartridge life The toner cartridge needs to be replaced regularly. Toner cartridge life depends on the amount of content in a printed document. Toner cartridge life varies in actual usage. The following is the approximate number of pages that the toner cartridge can print according to the various printing examples. Example 1 Approx. 2,500 pages can be printed. Table of Contents1. 1. Table of Contents 1. Introduction and Installation Accessories 1.1 Included accessories.1.
15. Index 15.
15.
15.
For hearing or speech impaired TTY users, TTY: 1-877-833-8855 *MB1500* *MB1500* PNQX3900YA C0711KU1022-CD
