Operating instructions

94
Specifications
Technical data about this product
Applicable Lines: Public Switched Telephone Network
Document Size: Max. 216 mm in width
Max. 600 mm in length
Effective Scanning Width: 208 mm
Printing Paper Size: 210 mm × max. 50 m roll
Effective Printing Width: 208 mm
Transmission Time*: Approx. 15 s/page (Original mode)
Approx. 30 s/page (G3 Normal mode)
Scanning Density: Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm —Standard mode
7.7 lines/mm —Fine/Half tone mode
15.4 lines/mm —Super fine mode
Halftone Level: 64-level
Scanner Type: CCD image sensor
Printer Type: Thermal Printing
Data Compression System: Modified Huffman (MH), Modified READ (MR)
Modem Speed: 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating Environment: 5 – 35 °C, 45 – 85 % RH (Relative Humidity)
Dimensions (H × W × D): 118 × 351 × 265 mm
Mass (Weight): Approx. 3.7 kg
Power Consumption: Standby: Approx. 6.5 W
Transmission: Approx. 16 W
Reception: Approx. 23 W (When receiving the CCITT No.1 Test Chart)
Copy: Approx. 32 W (When copying the CCITT No.1 Test Chart)
Maximum: Approx. 120 W
Power Supply: 220 – 240 V AC, 50 Hz
Memory Capacity**: Voice memory: Approx. 18 minutes of recording time including the greeting
message***
Fax memory: Approx. 13 pages of memory reception
(Based on the CCITT of No. 1 Test Chart in standard resolution.)
** Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the other
party’s machine.
The 15 second speed is based upon the CCITT No. 1 Test
Chart on the condition that memory transmission is performed.
** If both fax documents and voice messages are recorded in
memory, the corresponding capacities above will be shortened.
*** Recording time may be reduced by the calling party’s
background noise.
CCITT No. 1 Test Chart
Note:
●
Any details given in these instructions are subject to change without notice.
●
The pictures and illustrations in these instructions may vary slightly from the actual product.