Operating instructions

Transferring recorded messages to another
telephone
74
Options
Your unit will play the message
transfer greeting message.*1
This is a telephone
answering system.
Please enter your remote ID
for remote operation.
This feature allows your unit to call a designated telephone or pager number each time an incoming voice
message is recorded.
You can choose Message transfer or Pager call.
Message transfer: First program the transfer telephone number. When an incoming message is recorded in
your unit, the message will be transferred. You can retrieve the message during the same call using the
remote operation.
Pager call: First program the pager number. When an incoming call is recorded, your pager will be called.
Call your unit and retrieve the message using the remote operation.
●
This feature operates in the TAD/FAX mode.
●
For details on the remote operation, see page 69.
●
Use a touch tone telephone to access your unit.
An incoming voice message is recorded in memory.
Your unit calls the transfer telephone number or pager number depending on your setting.
The transfer telephone rings, then
answers the call.
Enter the remote operation ID (p. 70).
Retrieve the message using the
remote operation (p. 69).
*1 Message-transfer greeting message
can be changed (p. 76).
*2 To display the message on your
pager, see page 75 step 6.
within 60 seconds
Message transfer
Your pager beeps.*2
Call your unit to retrieve the message
using the remote operation (p. 69).
Pager call
Pre-recorded message:
Pager
6 6 66