Operating instructions

73
Remote Operation
Answering Device
Changing the receive mode to the
TEL mode
Press to change the setting of the receive mode
from TAD/FAX to TEL.
●
You cannot return to the TAD/FAX mode in the same
call. To return to the TAD/FAX mode, see below.
6 0
Press to turn the message transfer/pager call ON.
6 1
Voice guide example:
Turning the message transfer/pager
call on or off
You must pre-program a transfer telephone number or a
pager number (p. 75) before using this feature.
Press to turn the message transfer/pager call
OFF.
6 2
●
If a transfer telephone number or a pager number is
not programmed, you cannot turn this feature ON. The
voice guide will prompt you.
Skipping the greeting message
Press during the greeting message playback.
●
The unit will skip the rest of the greeting message.
0
Message transfer is set.
Transfer phone number is 123456789.
or
Pager call is set.
Pager number is 120255511234
Message transfer is off.
or
Pager call is off.
Transfer phone number is not set.
or
Pager number is not set.
Returning the receive mode to the TAD/FAX mode
You can change the setting of the receive mode from TEL to TAD/FAX from a remote location.
1. Call your unit and wait for 20 rings.
●
The answering device will temporarily answer the line.
2. Enter the remote operation ID during the greeting message.
●
Your unit will switch to the TAD/FAX mode.