Operating instructions

66
Playing Messages
When the unit has recorded incoming voice messages:
— the PLAY MESSAGES indicator will flash,
— the call counter will show the total number of recorded
messages, and
— slow beeps will sound if message alert (p. 78) is set
to “ON”.
When the PLAY MESSAGES indicator
flashes
Press .
●
Only the new recorded messages will be played.
When the PLAY MESSAGES indicator
lights
Press .
●
All messages will be played.
Note:
●
During playback, the display shows the recorded order
of the messages.
●
You can adjust the speaker volume using or .
●
The number of calls in the call counter will not
decrease until you erase the recorded messages.
PLAY MESSAGES
PLAY MESSAGES
Listening to recorded messages
/
CALLS
(call counter)
FLASH/LIGHT
PLAY
MESSAGES
Voice time/day stamp
During playback, a synthesized voice will
announce the time and day of the week when
each message was recorded.
Erasing a specific message
Press while listening to the message you want
to erase.
Erasing all the messages
1. Press after listening to all of the messages.
Display:
2. Press .
●
To stop, press .
3. Press .
ERASE COMPLETED
ERASING
START/COPY/SET
STOP
YES: PRESS SET
ERASE MESSAGES?
START/COPY/SET
PRESS START
1.ALL MESSAGES
ERASE
ERASE
STOP
START/COPY/SET
ERASE
Erase unnecessary messages to prevent memory from becoming full.
Erasing recorded messages