Operating instructions

1
Press .
Display:
2
Rotate until the following is
displayed.
3
Enter the name, up to 10 characters, following the
instructions on page 27.
Example:
4
Press .
5
Enter the telephone number, up to 30 digits.
Example:
●
If you want to enter a hyphen, press .
6
Press .
●
To program other items, repeat steps 3 to 6.
7
Press to exit the
program.
DIRECTORY PROGRAM
NAME=
REGISTERED
START/COPY/SET
HYPHEN
NO.=5552233
NO.=
START/COPY/SET
NAME=Alice
NAME=
EASY DIAL
OR USE EASYDIAL
PRESS STATION
DIRECTORY PROGRAM
EASY DIAL
35
Telephone
To delete a character or number
●
Move the cursor to the character or number you
want to delete and press .
To keep the telephone number
secret
Press after entering the telephone
number in step 5.
●
A secret number cannot be viewed after this is
set.
●
The telephone number will not appear on the
telephone number list.
●
Pressing does not count as a digit.
SECRET
SECRET
STOP
Storing names and telephone numbers in the
EASY DIAL directory
For rapid access to frequently dialled numbers, the unit also provides an EASY DIAL directory (up to 60
stations) in addition to the One-Touch Dial.
INSERT
DIRECTORY PROGRAM
HYPHEN
STOP
START/COPY/SET
EASY DIAL
/
SECRET
Note:
●
You can confirm the stored items on the
display (p. 37) or on the telephone number
list (p. 88).
●
When the following message is displayed in
step 6, you can only store 5 items.
Display:
●
If there is no space to store new stations, the
following message is displayed in step 1.
Erase unnecessary stations (p. 36).
●
The total number of stations available in the
EASY DIAL directory and One-Touch Dial
combined, is 60.
●
A hyphen or a space entered in a telephone
number counts as two digits.
DIRECTORY FULL
SPACE= 5 DIRS.
To correct a mistake
●
Press or to move the cursor to the
incorrect character, then make the correction.
To insert a character or number
1. Press or to move the cursor to the
position to the right of where you want to insert the
character or number.
2. Press to insert a space and enter the
character or number.
INSERT