Operating instructions

3. Telephone
26
3.10 Erasing caller
information
L Keep the front cover page open for button
locations.
3.10.1 Erasing all caller
information
1 Press {MENU} repeatedly to display
“CALLER SETUP”.
2 Press {SET}.
3 Press {SET}.
L To cancel erasing, press {STOP}, then
{MENU}.
4 Press {SET}.
5 Press {STOP} to exit the program.
3.10.2 Erasing specific caller
information
1 Press {CALLER ID SEARCH}.
2 Press {A} or {B} repeatedly to display the
desired entry.
3 Press {<}.
L To cancel erasing, press {STOP} 2 times.
4 Press {SET}.
L To erase other entries, repeat steps 2 to
4.
5 Press {STOP} to exit the program.
3.11 Storing caller
information
Important:
L This feature is not available in the
following cases.
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
L Keep the front cover page open for button
locations.
1 Press {CALLER ID SEARCH}.
2 Press {A} or {B} repeatedly to display the
desired entry.
3 Press {DIRECTORY PROGRAM}.
4 Select the station key or navigator directory.
For stations 1–3:
1. Press the desired station key.
2. Press {SET}.
3. Press {SET}.
For stations 4–11:
1. Press the desired station key.
2. Press {SET}.
For stations 12–22:
1. Press {LOWER}, then press the desired
station key.
2. Press {SET}.
For navigator directory:
1. Press {<} or {>}.
2. Press {SET}.
5 Press {SET}.
Note:
L You can confirm the stored entries in the
telephone number list (page 54).
L The unit can only store a name of up to 10
characters long.
L To edit a name or number, see page 23.
L If you enter a new entry into a station key, the
previous entry will be replaced.
L If you use stations 1–3 as broadcast keys,
you cannot store caller information for
stations 1–3 (page 29).
FL511E.book Page 26 Monday, June 30, 2003 5:55 PM