Operating instructions
3. Telephone
25
– The caller information does not
include a telephone number.
1 Press {CALLER ID SEARCH}.
2 Press {A} to search from the most recent
calls.
Press {B} to search from the oldest calls.
L If you need to edit the telephone number,
see page 25.
3 Press {MONITOR} or lift the handset to call
back the displayed party.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX START}.
To change the display of the caller
information
Press {NAME/TEL NO.} repeatedly after step 2.
Example: 1345678901
11:20AM 20 Jul ,
b
SAM LEE
11:20AM 20 Jul ,
L Check mark (,) on the display means the call
has already been viewed or answered.
Display while viewing
L When the unit did not receive name
information, the display will show “NO NAME
RCVD”.
L When no calls have been received, the
display will show “NO CALLER DATA”.
To stop viewing
Press {STOP} after step 2.
3.8.1 Editing a caller’s telephone
number before calling back
1 Press {CALLER ID SEARCH}.
2 Press {A} or {B} repeatedly to display the
desired entry.
3 Press {NAME/TEL NO.} to display the
telephone number.
4 Press dial key (0 to 9) or {*} to enter the
editing mode and edit the telephone number.
5 Press {MONITOR} or lift the handset to call
back the edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX START}.
Note:
L The edited telephone number will not be
saved in the caller information. To save in the
directory, see page 26.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
To delete a number
Press {<} or {>} to move the cursor to the
number you want to delete and press {STOP}.
To insert a number
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the number.
2. Press {HANDSET MUTE} to insert a space
and enter the number.
3.9 Printing the Caller ID
list
L Keep the front cover page open for button
locations.
1 Press {CALLER ID PRINT} to start printing.
L The display will show “ERASE ALL OK?”
after printing.
2 Press {STOP} to exit the program.
L To erase all of the stored caller
information, press {SET} instead of
{STOP}.
{FAX START}
{STOP}
{NAME/TEL NO.}{HANDSET MUTE}
{MONITOR}
{CALLER ID SEARCH}
{<}{>}
{A}{B}
FL511E.book Page 25 Monday, June 30, 2003 5:55 PM