Conference Recording Speakerphone System Operating Instructions

Recording a Conversation
27
Playing back a recorded
conversation
When conversations have been recorded,
“ ” and the total number of recorded
conversations are displayed while the unit
is in standby mode.
Press {PLAY} ({F1} key).
L The unit will play back the new recorded
conversations.
L When you have no new recorded
conversations, the unit will play back all
recorded conversations.
L If the unit has no recorded
conversations, the display will show
“No recordings”, and the unit will go
back to standby mode.
Note:
L The current conversation number (for
example, “#1”) is displayed during
playback.
During playback
{<} {>}
{STOP}
{#} (SKIP > )
{0} (22)
{*} ( < REPEAT)
#1 Play
< 22 >
00:00:01
Key Command
{FF}
({F3} key)
Change fast-forward speed
(four times or sixty times
normal speed), each time
you press {FF}
L If {PLAY} ({F2} key) is
pressed during fast-
forwarding, playback will
be resumed at normal
speed.
L The selected speed will
flash on the display (“x4”
or “x60”).
{REW}
({F1} key)
Change rewind speed (four
times or sixty times normal
speed), each time you
press {REW}
L If {PLAY} ({F2} key) is
pressed during rewinding,
playback will be resumed
at normal speed.
L The selected speed will
flash on the display (“x4”
or “x60”).
{*} (<) Repeat conversation
L If {*} (<) is pressed
within the first 2 seconds,
the previous conversation
will be played.
L If {*} (<) is pressed
during playback of the
first conversation, the first
conversation will be
repeated.
{#} (>) Skip conversation
{0} (22) Pause playback
L To resume playback,
press {PLAY} ({F2} key).
L To stop playback
completely, press
{STOP}.
{STOP} Stop playback
TS730AZ.book 27 ページ ２００５年１１月９日 水曜日 午後４時３４分