User Guide

ManualsBrandsPanasonic ManualsTelephoneKX-TG2336

2.4 GHz Digital Cordless Phone

Operating Instructions

Model No. KX-TG2336

Pulse-or-tone dialing capability

The unit is Caller ID compatible. To display the caller’s name and phone number,

you must subscribe to Caller ID service.

PLEASE READ BEFORE USE AND SAVE.

Panasonic World Wide Web address: http://www.panasonic.com

for customers in the USA or Puerto Rico

Charge the battery for 6 hours before initial use.

PQQX13986YA.book 1 ページ２００４年１月２２日　木曜日　午後５時４０分

Summary of content (72 pages)

PAGE 1
PQQX13986YA.book 1 ページ２００４年１月２２日木曜日午後５時４０分 2.4 GHz Digital Cordless Phone Operating Instructions Model No. KX-TG2336 Pulse-or-tone dialing capability The unit is Caller ID compatible. To display the caller’s name and phone number, you must subscribe to Caller ID service. PLEASE READ BEFORE USE AND SAVE. Charge the battery for 6 hours before initial use. Panasonic World Wide Web address: http://www.panasonic.
PAGE 2
PQQX13986YA.book 2 ページ２００４年１月２２日木曜日午後５時４０分 Thank you for purchasing your new Panasonic cordless telephone. Please read the IMPORTANT SAFETY INSTRUCTIONS on page 63 before use. Read and understand all instructions. Caller ID, Call Waiting and Voice Mail Service, where available, are telephone company services. After subscribing to Caller ID this phone will display a caller’s name and phone number.
PAGE 3
PQQX13986YA.book 3 ページ２００４年１月２２日木曜日午後５時４０分 For Best Performance Battery Charge The handset is powered by a rechargeable NickelMetal Hydride (Ni-MH) battery. Charge the battery for 6 hours before initial use (p. 9). Base Unit Location/Noise Calls are transmitted between the base unit and handset using wireless radio waves.
PAGE 4
PQQX13986YA.book 4 ページ２００４年１月２２日木曜日午後５時４０分 Contents Preparation Advanced Operation Location of Controls . . . . . . . 6 Installation . . . . . . . . . . . . . . . Connections . . . . . . . . . . . . . Installing the Battery in the Handset . . . . . . . . . . . . . . . Battery Charge . . . . . . . . . . . 8 8 9 9 Programmable Settings . . . . Programming Guidelines . . . Function Menu Table . . . . . Display Language . . . . . . . Dialing Mode . . . . . . . . . . . Line Mode . . . . . . . . . . .
PAGE 5
PQQX13986YA.book 5 ページ２００４年１月２２日木曜日午後５時４０分 Contents Useful Information Belt Clip . . . . . . . . . . . . . . . . . 50 Preparation Shoulder Rest Attachment . . 50 Wall Mounting . . . . . . . . . . . . 51 Optional Headset . . . . . . . . . 52 Direct Commands . . . . . . . . . 53 If the Following Appear on Your Display... . . . . . . . . 55 Troubleshooting . . . . . . . . . . 56 Basic Operation openLCR Service for Caller IQ . . . . . . . . . . . . . 59 Turning Caller IQ on or off . .
PAGE 6
PQQX13986YA.book 6 ページ２００４年１月２２日木曜日午後５時４０分 Location of Controls Base unit [VM] (Voice Mail) Button (p. 45) IN USE Indicator (p. 23) VM (Voice Mail) Indicator (p. 44) Hook (p. 51) [*] (TONE) Button (p. 46) Antenna (p. 3) Charge Contacts (p. 10) Speaker [LOCATOR/INTERCOM] Button (p. 37) [FLASH/CALL WAIT] Button (p. 46, 47) [MUTE] Button (p. 46) [REDIAL] Button (p. 22) [HOLD/CONF] (Conference) Button (p. 22, 41) CHARGE Indicator (p. 9) [SP-PHONE] (Speakerphone) Button and Indicator (p.
PAGE 7
PQQX13986YA.book 7 ページ２００４年１月２２日木曜日午後５時４０分 Location of Controls Handset Preparation Ringer/Message Alert Indicator (p. 18, 23) Antenna Back side Speaker Receiver Display Soft Keys (see below) Headset Jack (p. 52) [C] (TALK) Button (p. 19) [s] (Speakerphone) Button (p. 19) [*] (TONE) Button (p. 46) [HOLD/INTERCOM] Button (p. 20, 37) [OFF] Button (p. 11, 19) [MENU] Button (p. 11) Navigator Key ([d], [B]) (see below) [REDIAL] Button (p. 20) [FLASH/CALL WAIT] Button (p. 46, 47) Microphone (p.
PAGE 8
PQQX13986YA.book 8 ページ２００４年１月２２日木曜日午後５時４０分 Installation Connections Fasten the cords. Hooks Single-Line Telephone Jack (RJ11C) Telephone Line Cord Power Outlet (AC 120 V, 60 Hz) AC Adaptor • USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) • If your unit is connected to a PBX which does not support Caller ID and voice mail services, you cannot access those services.
PAGE 9
PQQX13986YA.book 9 ページ２００４年１月２２日木曜日午後５時４０分 Installation Installing the Battery in the Handset Insert the battery (1), and press it down until it snaps into the compartment (2). Close the cover. Preparation 2 1 To replace the battery: Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one (p. 10). Close the cover and charge the battery for 6 hours. Battery Charge Place the handset on the base unit. Charge for 6 hours before initial use.
PAGE 10
PQQX13986YA.book 10 ページ２００４年１月２２日木曜日午後５時４０分 Installation Recharge Recharge the battery when: —“Recharge battery” is displayed on the handset, Recharge battery —“7” flashes, or —the handset beeps intermittently while it is in use. • The display will continually indicate “Recharge battery” and/or “7” will flash when the handset battery is charged for less than 15 minutes and the handset is lifted off the base unit.
PAGE 11
PQQX13986YA.book 11 ページ２００４年１月２２日木曜日午後５時４０分 Programmable Settings Programming Guidelines Handset This unit has several programmable functions which can be selected from the function menu on the display (p. 12). Back Preparation The soft keys selects the functions displayed above each soft key. Select When “d” or “B” is displayed, navigator key scrolls through the menu. [OFF] exits programming. [MENU] enters the function menu.
PAGE 12
PQQX13986YA.book 12 ページ２００４年１月２２日木曜日午後５時４０分 Programmable Settings Function Menu Table Handset You can use the following functions to customize your unit. See the corresponding pages for function details. • After pressing [MENU], you can also program menu items directly by pressing ([0] to [9], [*] and [#]) instead of using the soft keys (p. 53 – 54). Main menu V.M. access Sub-menu I Sub-menu II (p. 44) Ringer setting Voice enhancer (p. 21) Caller IQ Ringer volume (p. 15) Ringer tone (p.
PAGE 13
PQQX13986YA.book 13 ページ２００４年１月２２日木曜日午後５時４０分 Programmable Settings Display Language Handset You can select either “English” or “Spanish” as the display language. The factory preset is “English”. Preparation 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. 3 Scroll to “Change language” by pressing [d] or [B], then press Select. 4 To change from English to Spanish, press Español. To change from Spanish to English, press English.
PAGE 14
PQQX13986YA.book 14 ページ２００４年１月２２日木曜日午後５時４０分 Programmable Settings Line Mode Handset The line mode is preset to “B” and generally should not be adjusted. If “Line in use” on the handset is not displayed properly or the IN USE indicator on the base unit does not light properly, the line mode selection is incorrect. Set line mode to “A”. 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. 3 Scroll to “Set tel line” by pressing [d] or [B], then press Select.
PAGE 15
PQQX13986YA.book 15 ページ２００４年１月２２日木曜日午後５時４０分 Programmable Settings Ringer Volume Preparation You can select the handset or base unit ringer volumes to high, medium, low, or off. The factory preset is HIGH. If the handset and base unit ringer is turned off, the handset or base unit will ring at the low level for intercom calls, and will not ring for outside calls. Caller names will not be announced even if the Talking Caller ID feature is turned on (p. 25, 26).
PAGE 16
PQQX13986YA.book 16 ページ２００４年１月２２日木曜日午後５時４０分 Programmable Settings Base unit ringer volume Base Unit Make sure the base unit is not being used. To set the ringer volume to high (preset), medium, or low, press VOLUME [<] or [>]. • To increase volume, press VOLUME [>]. To decrease volume, press VOLUME [<]. • To stop ringing, press [0]. To turn the ringer off, press and hold VOLUME [<] until 2 beeps sound. To turn the ringer on, press VOLUME [<] or [>]. • The base unit will ring at the low level.
PAGE 17
PQQX13986YA.book 17 ページ２００４年１月２２日木曜日午後５時４０分 Programmable Settings 4 Select the desired ringer tone by pressing [d] Ringer tone 1:Tone 1 KBack dB SaveL or [B]. Preparation • The handset will ring and the ringer tone will change. If the ringer volume has been turned off, the handset will not ring (p. 15). • You can also select the ringer tone by pressing [1] to [7]. 5 Press Save, then press [OFF].
PAGE 18
PQQX13986YA.book 18 ページ２００４年１月２２日木曜日午後５時４０分 Programmable Settings LCD Contrast Handset There are 6 levels of LCD contrast. The factory preset is “level 3”. 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. 3 Scroll to “LCD contrast” by pressing [d] or [B], then press Select. 4 Select the desired contrast by pressing [d] or [B]. • The contrast will change. Initial setting KBack dB SelectL LCD contrast KBack dB SelectL Ex.
PAGE 19
PQQX13986YA.book 19 ページ２００４年１月２２日木曜日午後５時４０分 Making Calls Using the Handset Handset 1 Press [C]. • “Talk” is displayed. 2 Dial a phone number. • The dialed number is displayed. • After a few seconds, the display will show the length of the call. Display Soft Keys [C] [OFF] [d], [B] [s] 3 To hang up, press [OFF] or place the handset on the base unit. [REDIAL] Basic Operation Microphone [HOLD/INTERCOM] To have a hands-free phone conversation 1 Press [s]. • “SP-phone” is displayed.
PAGE 20
PQQX13986YA.book 20 ページ２００４年１月２２日木曜日午後５時４０分 Making Calls To dial after confirming the entered number To redial using the redial list (Memory Redial) 1 Enter a phone number. The last 5 phone numbers dialed are stored in the redial list. 3334444| KClear PauseL • If you misdial, press Clear. Enter the correct number. • If a pause is required when dialing, press Pause where needed (p. 47). • To cancel, press [OFF]. 2 Press [C] or [s].
PAGE 21
PQQX13986YA.book 21 ページ２００４年１月２２日木曜日午後５時４０分 Making Calls Voice Enhancer Technology Panasonic’s Voice Enhancer Technology clarifies the voice of the person you are talking to, reproducing a more natural-sounding voice that is easier to hear and understand. Voice Enhancer Technology can be turned on or off. The factory preset is OFF. • Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off.
PAGE 22
PQQX13986YA.book 22 ページ２００４年１月２２日木曜日午後５時４０分 Making Calls Using the Base Unit Base Unit 1 Press [SP-PHONE]. • The SP-PHONE indicator lights. 2 Dial a phone number. 3 When the other party answers, talk [HOLD/CONF] [SP-PHONE] and Indicator into the MIC (microphone). 4 To hang up, press [SP-PHONE]. [REDIAL] • The indicator light goes out.
PAGE 23
PQQX13986YA.book 23 ページ２００４年１月２２日木曜日午後５時４０分 Answering Calls When a call is received, the unit rings, “Incoming call” is displayed, and the Ringer/Message Alert indicator on the handset and the IN USE indicator on the base unit flash rapidly. If you subscribe to Caller ID, see page 24. Handset 1 Press [C] or [s]. Ringer/Message Alert Indicator • You can also answer a call by pressing any button except [d], [B] or [OFF]. 2 To hang up, press [OFF] or place the handset on the base unit.
PAGE 24
PQQX13986YA.book 24 ページ２００４年１月２２日木曜日午後５時４０分 Caller ID Service This unit is compatible with Caller ID services offered by your telephone company. If you subscribe to Caller ID, caller names and phone numbers will be displayed and recorded in the Caller List. How Caller ID information is displayed and announced When a call comes in, the unit will ring and Caller ID Example information will be received.
PAGE 25
PQQX13986YA.book 25 ページ２００４年１月２２日木曜日午後５時４０分 Caller ID Service Talking Caller ID Basic Operation To use this feature, you need to subscribe to Caller ID. For further information, please contact your telephone company. • If the unit does not receive Caller ID information, the unit will announce “Call from out of area”, “Call from private caller”, or “Call from long distance”. If a call is received from an area where name display service is not available, “Number available” will be announced.
PAGE 26
PQQX13986YA.book 26 ページ２００４年１月２２日木曜日午後５時４０分 Caller ID Service Base unit Talking Caller ID feature Handset This feature must be turned on or off for the base unit by using the handset. 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. Initial setting KBack dB SelectL 3 Scroll to “Set base unit” by pressing [d] or [B], then press Select. Set base unit KBack dB SelectL 4 Scroll to “Talk Caller ID” by pressing [d] or [B], then press Select.
PAGE 27
PQQX13986YA.book 27 ページ２００４年１月２２日木曜日午後５時４０分 Using the Caller List Viewing the Caller List Handset 1 Press Rcvd calls, [d], or [B] to enter the Caller List. Ex. 2 calls missed. 2 missed calls Rcvd Phone book L Kcalls 2 missed calls dB=Scroll list KAll erase 2 To search from the most recent call, press [d]. To search from the oldest call, press [B]. Basic Operation • The caller’s name, number and the time and date of the call are displayed.
PAGE 28
PQQX13986YA.book 28 ページ２００４年１月２２日木曜日午後５時４０分 Using the Caller List Editing the Caller’s Phone Number Handset You can edit a phone number in the Caller List by removing its area code and/or the long distance code “1”. Once you call back an edited number, this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call (Caller ID Number Auto Edit, page 29). 1 Press Rcvd calls, [d], or [B] to enter the Caller List.
PAGE 29
PQQX13986YA.book 29 ページ２００４年１月２２日木曜日午後５時４０分 Using the Caller List Caller ID Number Auto Edit Handset Basic Operation Once you call back an edited number (p. 28), this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call. For example, it can ignore the area code of calls originating from your area code, so that you can call these numbers from the Caller List without dialing the area code.
PAGE 30
PQQX13986YA.book 30 ページ２００４年１月２２日木曜日午後５時４０分 Using the Caller List Storing Caller Information in the Phone Book Handset Caller names and phone numbers that are in the Caller List can be stored in the phone book. 1 Press Rcvd calls, [d], or [B] to enter the Caller List. 2 missed calls Rcvd Phone book L Kcalls 2 missed calls dB=Scroll list KAll erase 2 Scroll to the desired caller by pressing [d] or [B]. TURNER,CINDY 11:00A JUN.12 ×3 SelectL KErase 1-555-456-7890 11:00A JUN.
PAGE 31
PQQX13986YA.book 31 ページ２００４年１月２２日木曜日午後５時４０分 Using the Caller List Erasing Caller Information Handset To erase a specific caller 1 Press Rcvd calls, [d], or [B] to enter the Caller List. 2 missed calls Rcvd Phone book L Kcalls 2 missed calls dB=Scroll list KAll erase 2 Scroll to the desired caller by pressing [d] or [B], then press Erase. Basic Operation • To erase other items, repeat step 2. • To exit the Caller List, press [OFF]. REAGAN,TOM 12:20A JUN.
PAGE 32
PQQX13986YA.book 32 ページ２００４年１月２２日木曜日午後５時４０分 Phone Book The handset can store up to 50 names and phone numbers in its phone book. You can make a call by selecting a name or number from the phone book. Storing Names and Numbers Handset 1 Press Phone book. Rcvd Kcalls 2 Press Add. • The display will show the number of stored items. 3 Enter a name of up to 16 characters with the dialing buttons ([0] to [9]) (p. 33), then press [d]. • If a name is not required, press [d] then go to step 4.
PAGE 33
PQQX13986YA.book 33 ページ２００４年１月２２日木曜日午後５時４０分 Phone Book Selecting characters to enter names Enter names using the dialing buttons. Press each button until the desired character is displayed. • Pressing each button selects a character in the order shown below. Keys Characters Keys Characters [1] # & ’ ( ) ; , – .
PAGE 34
PQQX13986YA.book 34 ページ２００４年１月２２日木曜日午後５時４０分 Phone Book Dialing from the Phone Book Handset 1 Press Phone book. 2 Press Search. Phone book 7 items SearchL KAdd 3 Scroll to the desired item. To scroll down, 0-9=Name search dB=Scroll list press [d]. To scroll up, press [B]. Phone book items are sorted in the following order: 1 Alphabet letters (Alphabetical) 2 Space & ’ ( ) , – . / 3 Numbers 0 to 9 4 #; 5 Telephone numbers (If no name is stored) 4 Press [C] or [s].
PAGE 35
PQQX13986YA.book 35 ページ２００４年１月２２日木曜日午後５時４０分 Phone Book Index table Keys Index Keys Index [1] Symbols, 1 [6] M, N, O, 6 [2] A, B, C, 2 [7] P, Q, R, S, 7 [3] D, E, F, 3 [8] T, U, V, 8 [4] G, H, I, 4 [9] W, X, Y, Z, 9 [5] J, K, L, 5 [0] 0, Space Chain Dial Handset You can dial a combination of phone book or manual key pad entries while making a call.
PAGE 36
PQQX13986YA.book 36 ページ２００４年１月２２日木曜日午後５時４０分 Phone Book Editing an Item in the Phone Book Handset 1 Press Phone book. 2 Press Search. 3 Scroll to the desired item by pressing [d] or [B], then press Edit. • To search for the item by initial, see page 34. 4 Edit the name (p. 33), then press [d]. • If you do not need to change the name, press [d] then go to step 5. 5 Edit the phone number, then press [d]. • If you do not need to change the number, press [d] then go to step 6.
PAGE 37
PQQX13986YA.book 37 ページ２００４年１月２２日木曜日午後５時４０分 Intercom Intercom calls can be made between the handset and the base unit. Making Intercom Calls From Handset 1 Press [HOLD/INTERCOM]. • The base unit will ring for 1 minute. • To stop paging, press [OFF]. 2 When the paged party answers, start talking. • You can switch to the speaker by pressing [s]. To switch back to the receiver, press [C]. Calling Base Intercom 00-00-05 MuteL 3 To disconnect the intercom, press [OFF].
PAGE 38
PQQX13986YA.book 38 ページ２００４年１月２２日木曜日午後５時４０分 Intercom Answering Intercom Calls Handset When the handset is paged, it rings and the Ringer/Message Alert indicator flashes rapidly. 1 Press [C], [s] or [HOLD/INTERCOM]. • You can also answer a call by pressing any button except [d], [B] or [OFF]. Call from Base 2 To disconnect the intercom, press [OFF]. Base Unit When the base unit is being paged, it rings. 1 Press [SP-PHONE] or [LOCATOR/INTERCOM].
PAGE 39
PQQX13986YA.book 39 ページ２００４年１月２２日木曜日午後５時４０分 Transferring a Call You can transfer an outside call to the base unit or the handset. From the Handset to the Base Unit 1 Handset: (1) During a call, press [HOLD/INTERCOM]. • The call is put on hold. (2) Press Base. (3) Wait for the paged party to answer, then you can announce the transfer. Line on hold. Transfer to KBase Hold Calling Base • If the paged party does not answer, press [C] or [s] to return to the outside call.
PAGE 40
PQQX13986YA.book 40 ページ２００４年１月２２日木曜日午後５時４０分 Transferring a Call Quick call transfer You can transfer a call without waiting for the paged party to answer. Handset 1 During a call, press [HOLD/INTERCOM], then press Base. 2 Press [OFF] to hang up. Base Unit 1 During a call, press [LOCATOR/INTERCOM]. 2 Press [SP-PHONE] to hang up. • The call will be transferred directly. • The paged party can answer the transferred call by pressing [C], [s] or [SP-PHONE].
PAGE 41
PQQX13986YA.book 41 ページ２００４年１月２２日木曜日午後５時４０分 Conference Calls While you are talking with an outside caller, the base unit user or the handset user can join the conversation and establish a conference call. Handset Base Unit 1 During a call, press 1 During a call, press [HOLD/INTERCOM]. [LOCATOR/INTERCOM]. • The call is put on hold. • The call is put on hold. 2 Press Base. 2 When the paged party answers, 3 When the paged party answers, press Conf on your unit to make a conference call.
PAGE 42
PQQX13986YA.book 42 ページ２００４年１月２２日木曜日午後５時４０分 Voice Mail Service Voice mail is an automatic answering service offered by your telephone company. If you subscribe to this service, your telephone company’s voice mail system can answer calls for you when you are unavailable to answer the phone or when your line is busy. Callers can leave messages that are saved in virtual voice mailboxes, which are maintained for you at the phone company, allowing you to listen to your messages whenever you like.
PAGE 43
PQQX13986YA.book 43 ページ２００４年１月２２日木曜日午後５時４０分 Voice Mail Service Setting Voice Mail (VM) Tone Detection Handset Your telephone company sends special signals (Voice mail tones) to the unit. Press [C], [s] or [SP-PHONE] to listen to the dial tone. If you hear a series of dial tones followed by a continuous dial tone, this indicates that a new message was recorded. Voice Mail detection is preset at the factory to ON.
PAGE 44
PQQX13986YA.book 44 ページ２００４年１月２２日木曜日午後５時４０分 Voice Mail Service Listening to Voice Mail Messages Handset Base Unit The unit will let you know that someone has left new voice mail for you: a) “Voice Mail” will be displayed on the handset, Ex. Handset on the base unit b) the Ringer/Message Alert indicator on the handset will flash slowly if Message Alert is Voice Mail Charging turned on (p. 18) and the handset is not in use, and Ex.
PAGE 45
PQQX13986YA.book 45 ページ２００４年１月２２日木曜日午後５時４０分 Voice Mail Service Base Unit 1 Press [VM]. • The base unit is connected to the telephone line and dials the access number (p. 42) in speakerphone mode. • If the base unit beeps 3 times, a voice mail access number is not stored. To store the number, see page 42. 2 Follow the pre-recorded instructions. 3 When finished, press [SP-PHONE].
PAGE 46
PQQX13986YA.book 46 ページ２００４年１月２２日木曜日午後５時４０分 Special Features Temporary Tone Dialing (For Rotary or Pulse Service Users) Handset Base Unit Press [*] (TONE) before entering access numbers which require tone dialing. • The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the dialing mode will return to pulse. Muting Your Conversation During a call, you can mute your phone so the other party cannot listen to you.
PAGE 47
PQQX13986YA.book 47 ページ２００４年１月２２日木曜日午後５時４０分 Special Features Using the PAUSE Key (For PBX Line/Long Distance Calls) Handset Example We recommend you press Pause or P if a pause is required for dial with a PBX or to make a long distance call. 9P15556667777| Ex. Line access number [9] (PBX) KClear PauseL OR 9P15551234567| [9] N Pause or P N Phone number • Pressing Pause or P once creates a 3.5 second pause.
PAGE 48
PQQX13986YA.book 48 ページ２００４年１月２２日木曜日午後５時４０分 Special Features Incoming Call Tone Handset Base Unit During an intercom call (p. 37), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to “2”, incoming call tones will be heard only 2 times. If this feature is turned off, no tones will be heard. The factory preset is “2”.
PAGE 49
PQQX13986YA.book 49 ページ２００４年１月２２日木曜日午後５時４０分 Special Features Key Tone Handset You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. 3 Scroll to “Key tone” by pressing [d] or [B], then press Select. 4 Select “Off” or “On” by pressing [d] or [B].
PAGE 50
PQQX13986YA.book 50 ページ２００４年１月２２日木曜日午後５時４０分 Belt Clip You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip Shoulder Rest Attachment Use the shoulder rest attachment if you need to keep your hands free during a phone conversation.
PAGE 51
PQQX13986YA.book 51 ページ２００４年１月２２日木曜日午後５時４０分 Wall Mounting This unit can be mounted on a wall phone plate. 1 Push the hook and turn it 4 Connect the telephone line cord. upward. Turn the hook until a click is heard. Mount the unit, then slide it down. • Raise the antenna. 2 Press the tabs in the direction of the arrows (1), then remove the wall mounting adaptor (2). 2 5 To charge the handset battery: 1 1 3 Connect the AC adaptor.
PAGE 52
PQQX13986YA.book 52 ページ２００４年１月２２日木曜日午後５時４０分 Optional Headset Connecting an optional headset to the handset allows hands-free phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories telephone number on page 2. Connecting an optional headset Open the headset jack cover, and insert the headset plug into the headset jack as shown below. Headset Jack • Headset sold separately.
PAGE 53
PQQX13986YA.book 53 ページ２００４年１月２２日木曜日午後５時４０分 Direct Commands Handset After pressing [MENU], you can also program menu items directly by pressing ([0] to [9], [*] and [#]) instead of using the soft keys. Menu item Command Selection items Page Ringer volume [1] [1] [0] : Off [1] : Low [2] : Medium [3] : High p. 15 Ringer tone (for handset) [1] [2] [1]–[3] : Tone pattern 1–3 [4]–[7] : Melody pattern 1–4 [8]–[9] : Downloaded melody pattern 1–2 *1 p.
PAGE 54
PQQX13986YA.book 54 ページ２００４年１月２２日木曜日午後５時４０分 Direct Commands Menu item Command Selection items Page Store VM access# [0] [7] [1] Go to Step 5 on page 42. — VM tone detect [0] [7] [2] [1] : On [0] : Off p. 43 Change language [0] [8] [1] : English [2] : Spanish p. 13 Message alert [0] [#] [1] : On [0] : Off p. 18 Ringer tone (for base unit) [0] [*] [1] [1]–[3] : Tone pattern 1–3 [4]–[7] : Melody pattern 1–4 [8]–[9] : Downloaded melody pattern 1–2 *1 p.
PAGE 55
PQQX13986YA.book 55 ページ２００４年１月２２日木曜日午後５時４０分 If the Following Appear on Your Display... The following will be displayed when the unit needs your attention. Display message Cause & Remedy Recharge battery • The battery needs to be charged. Recharge the battery (p. 10). Charge for 6h • The battery has been discharged. The handset will not work. Fully charge the battery (p. 9). No link to base. Move closer to base, try again. • The handset has lost communication with the base unit.
PAGE 56
PQQX13986YA.book 56 ページ２００４年１月２２日木曜日午後５時４０分 Troubleshooting If the handset display shows error messages, see “If the Following Appear on Your Display...” (p. 55) for the Cause & Remedy. Problem 56 Cause & Remedy “No link to base. Move closer to base, try again.” is displayed and an alarm tone sounds. • You are too far from the base unit. Walk closer to the base unit. • Confirm the base unit’s AC adaptor is plugged in. • Raise the base unit antenna.
PAGE 57
PQQX13986YA.book 57 ページ２００４年１月２２日木曜日午後５時４０分 Troubleshooting Problem Cause & Remedy • If the last number dialed was more than 48 digits long, the number will not be redialed correctly. You cannot make long distance calls. • Please make sure you have long distance service. • Check if Caller IQ is on. Turn Caller IQ off (p. 59). The handset does not display the caller’s name and/or phone number. • You need to subscribe to Caller ID. • Other telephone equipment may be interfering with your phone.
PAGE 58
PQQX13986YA.book 58 ページ２００４年１月２２日木曜日午後５時４０分 Troubleshooting Problem Cause & Remedy “Recharge battery” is displayed, “7” flashes, or the handset beeps intermittently. • Fully charge the battery (p. 9). “Charge for 6h” and “8” are displayed and the handset does not work. • The battery has been discharged. Fully charge the battery (p. 9). • Check battery installation (p. 9).
PAGE 59
PQQX13986YA.book 59 ページ２００４年１月２２日木曜日午後５時４０分 openLCR Service for Caller IQ This unit is compatible with services provided by openLCR. Important: • If you have any questions regarding the openLCR service, call openLCR’s customer service department at 1-866-openLCR(1-866-673-6527). • NEITHER PANASONIC COMMUNICATIONS CO., LTD. (PCC) NOR MATSUSHITA ELECTRIC CORPORATION OF AMERICA (MECA) IS IN ANY WAY AFFILIATED WITH, OR RESPONSIBLE FOR THE ACTS OR OMISSIONS OF, OPENLCR.COM, INC. (OPENLCR).
PAGE 60
PQQX13986YA.book 60 ページ２００４年１月２２日木曜日午後５時４０分 openLCR Service for Caller IQ Downloading Data You can download the following data to your unit from the openLCR web site. • Phone book data • Ringer melodies (Custom ringtone) • Function setup for your unit • Information such as weather forecasts, stock quotes, lottery results, sports scores and horoscopes (Internet content) Accessing the openLCR web site can be done from any computer with Internet access.
PAGE 61
PQQX13986YA.book 61 ページ２００４年１月２２日木曜日午後５時４０分 openLCR Service for Caller IQ To download data from openLCR Handset Each time you download data (p. 60) from openLCR, the information stored in your unit will be updated. To view up-to-date information, you will need to download it to your unit. • You can select the items of information on the web site which you want to view. • Horoscopes are for entertainment purposes only. 1 Press [MENU].
PAGE 62
PQQX13986YA.book 62 ページ２００４年１月２２日木曜日午後５時４０分 openLCR Service for Caller IQ • If the handset beeps 3 times and “Download incomplete. Phone book full.” is displayed, some items could not be stored in the phone book. Store items by following the steps below. 1. Erase items which do not exist on the web from the phone book of the unit (p. 36). 2. Access the openLCR web site. 3. Go to the web screen to create the phone book data. 4. Click Re-Download All . 5.
PAGE 63
PQQX13986YA.book 63 ページ２００４年１月２２日木曜日午後５時４０分 Important Safety Instructions Useful Information When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from AC outlets before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
PAGE 64
PQQX13986YA.book 64 ページ２００４年１月２２日木曜日午後５時４０分 Important Safety Instructions CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the battery(ies) specified. 2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions. 3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin.
PAGE 65
PQQX13986YA.book 65 ページ２００４年１月２２日木曜日午後５時４０分 FCC and Other Information The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
PAGE 66
PQQX13986YA.book 66 ページ２００４年１月２２日木曜日午後５時４０分 FCC and Other Information Operating near 2.4GHz electrical appliances may cause interference. Move away from the electrical appliances. FCC RF Exposure Warning: This product complies with FCC radiation exposure limits set forth for an uncontrolled environment.
PAGE 67
PQQX13986YA.book 67 ページ２００４年１月２２日木曜日午後５時４０分 Index A H Accessories . . . . . . . . . . . . . . . . . . 2 Answering calls, base unit. . . . . . 23 Answering calls, handset. . . . . . . 23 Auto talk . . . . . . . . . . . . . . . . 14, 23 Headset, optional. . . . . . . . . . . . . 52 Hold . . . . . . . . . . . . . . . . . . . . 20, 22 I Incoming call tone . . . . . . . . . . . . 48 Installation, AC adaptor . . . . . . . . . 8 Installation, battery. . . . . . . . . . . . .
PAGE 68
PQQX13986YA.book 68 ページ２００４年１月２２日 Index R Redial . . . . . . . . . . . . . . . . . . . 20, 22 Redial list . . . . . . . . . . . . . . . . . . . 20 —Registration . . . . . . . . . . . . . . . . . 49 Ringer off . . . . . . . . . . . . . 15, 16, 23 Ringer tone . . . . . . . . . . . . . . . 16, 17 Ringer volume . . . . . . . . . . . . 15, 16 Rotary service, tone dialing . . . . . 46 S Safety instructions . . . . . . . . . . . . 63 Shipping product for service . . . . . . . . . . . .
PAGE 69
PQQX13986YA.book 69 ページ２００４年１月２２日木曜日午後５時４０分 Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., Ave. 65 de Infanteria, Km. 9.
PAGE 70
PQQX13986YA.book 70 ページ２００４年１月２２日木曜日午後５時４０分 Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Servicenter.
PAGE 71
PQQX13986YA.book 71 ページ２００４年１月２２日木曜日午後５時４０分 Specifications ■ Base Unit Power Supply: AC Adaptor (120 V AC, 60 Hz) Power Consumption: Standby: Approx. 2.0 W Maximum: Approx. 5.4 W Frequency: 2.4 GHz – 2.48 GHz Dimensions (H x W x D): Approx. 85 mm x 175 mm x 200 mm (3 11/32" x 6 7/8" x 7 7/8") Mass (Weight): ■ Handset Power Supply: Frequency: Approx. 460 g (1.01 lb.) Ni-MH battery (3.6 V, 830 mAh) 2.4 GHz – 2.48 GHz Dimensions (H x W x D): Approx.
PAGE 72
PQQX13986YA.book 72 ページ２００４年１月２２日木曜日午後５時４０分 For product service • Visit our website: http://www.panasonic.com/support • Contact us via the web at: http://www.panasonic.com/contactinfo • Call us at: 1-800-211-PANA(7262) When you ship the product • Carefully pack your unit, preferably in the original carton. • Attach a letter, detailing the symptom, to the outside of the carton. Symptom • Send the unit to an authorized servicenter, prepaid and adequately insured.