Operation Manual

(*1) When adding “01” (hex) to default value, sending level

increases by 1.0dB.

ex.)

Item Default Data New Data

1C 1D 1B

Sending level -9.0dBm -8.0dBm -10.0dBm

(*2) When reducing “01” (hex) from default value, receiving

level increases by 1.0dB.

ex.)

Item Default Data New Data

5B 5A 5C

Receiving level -23.0dBm -24.0dBm -22.0dBm

Note:

*: When you enter the address, please refer to the table in Note: (P.51) of ENGINEERING MODE.

ex.)

Items (*4) Address Default Data New Data Possible Adjusted

Value MAX (hex)

Possible Adjusted

Value MIN (hex)

Remarks

Sending level 0F 35 Adjusted value Given value 30 00 (*1)

Receiving level 0F 37 Adjusted value Given value 70 40 (*2)

Battery Low 0F 04 9A - - -

(*3)

Frequency 00 00~00 01 00 60 - - -

ID 00 30~00 34 Given value - - -

(*3) Use these items in a READ-ONLY mode to confirm the contents. Careless rewriting may cause serious damage to the

Handset.

(*4)

Items Description

Sending level Analog Front End MIC Setting for Handset Mode

Receiving level Analog Front End LSR Setting for Handset Mode

Battery Low ADC value for battery low detection

Frequency Setting value of FREQ_TRIM_REG

ID International Portable Part Equipment Identities

KX-TCD150FXB / KX-TCD150FXC / KX-TCD152FXB / KX-TCA115EXB / KX-TCA115EXC