Advanced Hybrid System KX-TA1232 Installation Manual/ Features Guide/ Programming Guide/ Programming Tables Addendum for KX-T77 and KX-T73 Series This Installation Manual/Features Guide/Programming Guide/Programming Tables Addendum provides the additional information for the KX-T77 and KX-T73 Series Telephones and the Panasonic Advanced Hybrid System, KX-TA1232.
Table of Contents Table of Contents Installation Manual System Components Table .................................................................................3 Features Guide Buttons on Proprietary Telephones ..................................................................3 Call Log, Incoming .............................................................................................4 Caller ID ..........................................................................................................
Installation Manual & Features Guide System Components The following Panasonic Proprietary Telephones (PTs) and a DSS console are available for KX-TA1232.
Features Guide The following features are available with PTs depending on the type of the KX-T77 or KX-T73 series. Features T7735 T7335 T7730 T7720 T7320 T7750 T7350 T7740 Call Log, Incoming Caller ID/ Caller ID Call Waiting DSS Console*1 Handset/Headset Selection (for T7720) (for T7750) Hands-free Answerback Hands-free Operation *2 Room Monitor Station Programming The following programming items are available.
Programming Guide System Programming A display PT (KX-T7735, KX-T7730 or KX-T7335) is required for system programming. Using the Overlay A programming overlay is packed with the telephone at the factory. This overlay should be used at all times during programming. The features of the telephone keys change during programming as follows. (The original features are in parentheses.
Programming Guide Location of Controls with Overlay (Additional) The picture below shows the features of the buttons of the KX-T7735 or KX-T7335 during programming.
Programming Guide Viewing the Display The display gives you helpful information, such as the next step, previous entries, etc. The KX-T7735 utilizes two information lines for programming. The KX-T7730 utilizes one information line for programming. The display capacity is 16 digits. If your entry is longer than 16 digits, the user can scroll the display by pressing the Navigator Key ( ), or the or button.
Programming Guide [002] System Speed Dialing Name Set (Additional) Description Assigns names to the system speed dialing numbers assigned in program [001] System Speed Dialing Number Set. Display telephones can show the stored number during System Speed Dialing. Selection • Speed dial number: 000 through 499 • Name: 10 characters (max.) Default All speed dial numbers — Not stored Programming 1. Enter 002. Display: 002 SYS SPD NAME 2. Press NEXT. 3. 4. 5. 6. 7. 8.
Programming Guide [990] System Additional Information (Additional) < Area 10 > Bit Number 16 15 14 13 12 11 10 9 8 7 Display Example 6 5 4 3 2 1 1 11 1 1 1 1 11 1 1 1 1 1 1 1 Explanation for Area 10 Bit Description Selection 1-9 Unused 10 Enables the Message/Ringer Lamp 0 : enable flashing when an extension is in use or 1 : disable idle, and one of the following occurs: – An intercom call is incoming to the extension and Call Waiting Tone 1 is assigned.
Programming Tables Programming Tables [002] System Speed Dial Name Set SPD no. Name (max. 10 characters) SPD no. Name (max. 10 characters) SPD no. Name (max. 10 characters) Name Name Name SPD no. SPD no. stored SPD no. All: Not Default (max. 16 characters) (max. 16 characters) (max.
Programming Tables [002] System Speed Dial Name Set (contd.) SPD no. Name (max. 10 characters) SPD no. Name (max. 10 characters) SPD no. Name (max.
Programming Tables [002] System Speed Dial Name Set (contd.) SPD no. Name (max. 10 characters) SPD no. Name (max. 10 characters) SPD no. Name (max.
Programming Tables [002] System Speed Dial Name Set (contd.) SPD no. Name (max. 10 characters) SPD no. Name (max. 10 characters) SPD no. Name (max.
Programming Tables [002] System Speed Dial Name Set (contd.) SPD no. Name (max. 10 characters) SPD no. Name (max.
Programming Tables [990] System Additional Information [990] System Additional Information < Selection > Area Bit 10 1-9 10 10 10 11-16 : Unused : 0 (enable) / 1 (disable) : Unused Area 10 Bit 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Default 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Selection 15
© 2003 Panasonic Communications Co., Ltd. All Rights Reserved.
