Facsimile with Cordless Phone Quick Reference Guide

Hand Scanner Functions
Preparations
1
Scanning documents
2
1. Remove the cover.
1. Turn the power (power switch) ON.
2. Select the resolution. (文字：text, 写真：photo)
3. Set (operation) to the “ 読取 ” (scan)
position.
4. Set the hand scanner on the document.
5. Press (start/stop).
6. Move the hand scanner slowly
over the document.
Left side of
the document
Max. 208 mm
Scanner
position
2. Install the alkaline batteries (included).
9
Power Indicator
Flashes (Red)
Lights (Red)
Does not light
Power Switch
The battery power is low.
Replace the batteries.
Replace the batteries.
Memory is empty.
The battery power is full.
Memory Indicator
入
電源
切
Memory Indicator
Panasonic
読取方向
電源
スタート/ストップ
スタート/ストップ
7. Press (start/stop) to end the operation.
スタート/ストップ
入
切
動作 画質
文字
写真
電源
入
切
8. Turn the power (power switch) OFF.
電源
入
切
読取
消去
出力
動作
読取
消去
出力
読取位置
原稿左端
B5
A4
Panasonic
読取方向
Max. 1.5 m
– A beep is heard.
– The In Use indicator light turns on (green).
動作
読取
消去
出力
– If you want to scan the document again,
set (operation) to the “ 消去 ” (erase)
position.
Then repeat from
step 3.
読取位置
原稿左端
B5
A4
Panasonic
読取方向
Scanning
direction
Power
Indicator
33% of memory is used.
66% of memory is used.
99% of memory is used.
Memory is full.
Panasonic
読取方向
Cover
Power Indicator
In Use Indicator
Memory Indicator
(power switch)
(operation)
(resolution)
3
3
2
1
4
2
1
4
5
6