Facsimile with Cordless Phone Quick Reference Guide

Preparations
Push up to
open the
cover.
Installing the recording paper and stacker
1
Automatic dial mode setting
3
Connections
2
Close the cover.
Approx.
15 cm
click
Recording Paper
Incorrect Slack
Stacker
When the power cord and the telephone line cord are connected, the unit will start detecting the dial mode (tone
or pulse). If you cannot dial and “ ｶｲｾﾝ ﾁｪｯｸ ｴﾗｰ U61 ” is displayed, change the dial mode setting.
132
465
798
0
ストップ
選択 機能 登録
2. Press .
機能
1. Press (function).
9
0 7
7
1 1
ストップ
選択
登録
3. Press (select) to
select the dial mode
(ｶｲｾﾝｼｭﾍﾞﾂ).
4. Press (record).
5. Press (stop).
ｶｲｾﾝｼｭﾍﾞﾂ=ﾌﾟｯｼｭ
ｶｲｾﾝｼｭﾍﾞﾂ= 20
ｶｲｾﾝｼｭﾍﾞﾂ= 10
ｶｲｾﾝｼｭﾍﾞﾂ=ｼﾞﾄﾞｳ
Pulse 20pps
Pulse 10pps
Tone
Auto
Changing the dial mode
1. Set the dial mode to “20”.
(See “Changing the dial mode” shown on
the left.)
2. Dial (time signal).
If you cannot dial, change to “10”.
If you cannot dial after changing to “10”,
set to “
ﾌﾟｯｼｭ
” (tone).
Confirming the dial mode
Note:
If this unit is connected to a PBX or used as
an extension, dial the access code (eg. )
before the time signal.
0
2
Raise the antenna.
To Single
Telephone Line
To Power
Outlet
Connect to “ 回線 ” (line).