Facsimile with Cordless Phone Quick Reference Guide Model No. KX-PW100CL Thank you for purchasing a Panasonic facsimile.
Finding the controls Main unit (control panel) 1 2 3 4 5 6 7 8 9 10 11 KX-PW100CL-W 12 1 2 3 4 5 6 7 8 9 10 11 12 13 2 13 14 15 Liquid crystal display Redial button Start/Copy button starts faxing or copying. Select button Edit button Tone button switches to tone dialing. Hold button Pause button Flash button Speakerphone button Microphone Character button Mute button E-Mail button Resolution button selects the resolution when faxing or copying.
Finding the controls Portable handset How to use How to use function buttons key ● To use the phonebook. ● To redial the last number dialed. Speaker Function buttons refer to the function displayed on the bottom of the display. They function differently depending on the mode. LCD (with back light) To adjust the volume. ● To change Hiragana into Kanji. ● ● Displays battery strength, telephone numbers etc. 1 2 3 KX-FKN100-W FKN100-W 子機1 ● To make/answer calls. ● To end a call.
Installations and connections Installing the ink film 1 Open the control panel. 4 Insert the white core into the slots shown in the picture below. White core 1 Press here. Control panel 2 Open the control panel until it locks. 5 If the ink film is slack, tighten it by winding the “T” shaped gear. “T” shaped gear (blue) 2 Insert the ink film. 1 Do not be slacken. Find the “T” shaped gear (blue). Ink film 2 Insert the blue core into the right slot of the main unit.
Installations and connections Installing recording paper (A4 size) 1 Install the recording paper tray. 3 Close the paper entrance cover by leaning it back. 1 Insert the left tab on the recording paper tray into the left slot of the main unit. 2 Insert the right tab into the right slot of the main unit. Slot Tab 1 Recording paper tray Paper entrance cover 2 2 Insert the recording paper into the recording paper tray.
Installations and connections Setting up the portable handset 1 Plug Charger ● Power outlet (AC 100 V) You can charge the battery in the main unit. 1 Open the charger cover. AC adaptor Charger cover Push the mark “ • • • ”. 2 Click Battery 2 Charge the battery for 10 hours. Connector Red Black Battery cover 3 Charge the battery in the charger for 10 hours. Charge indicator –lights on: while charging. –lights off: charging completed. ■ How to close the charger cover.
Installations and connections Connecting the main unit 1 Raise the antenna. Click 回 (電話 線 停 回線へ 電用 )電話 機 Telephone line cord Wall jack 2 cord Connect the telephone line (Supplied accessory). Power outlet Power cord AC 100V 3 Connect the power cord. After the Power On... This unit will automatically select the dialing mode (Tone/Pulse).
Setting the date and time 1 Press . 機 能 登 録 モード 2 Press (Search button) repeatedly until the following is displayed. Setting your facsimile telephone number 1 Press . 機 能 登 録 モード 2 Press (Search button) repeatedly until the following is displayed. 最 初 の設 定 AAAAAAAAAAA[ SET] 3 Press . Cursor 最 初 の設 定 AAAAAAAAAAA[ SET] 3 Press . 2 002年 05月 01日 Example : ■ 2 002年 04月 01日 Example : ■ 15:45 10:10 4 Enter the correct year/month/day. Example: May 1, 2002 Press .
Setting your logo Example: Micah 1. Press once. M Cursor 2. Press six times. Mi 3. Press six times. M i cc 1 Press . 機 能 登 録 モード 4. Press to move the cursor to the next space and press 2 Press 最 初 の設 定 AAAAAAAAAAA[ SET] 4 Press Mica (Search button) repeatedly until the following is displayed. 3 Press four times. . 5. Press 6 Press five times. M i c a hh (Register). 登 録 しました (Search button) repeatedly until the following is displayed.
Character input and command key table Character Dial key Pressing the dial keys will select a character as shown below.
Automatic dialing on the main unit Storing names and telephone numbers in the phonebook Making a voice call using the phonebook 1 Press 2 Press (Phonebook). (Search button) repeatedly until the desired name is displayed. 3 Press (Speakerphone). Editing a stored name or number 1 Press (Phonebook). 電話帳検索 AAAAAA登 録 は[ SET] 2 Press (Register). “XXX” shows the remaining station numbers you can store. ● You can program up to 150 stations, including 4 pre-programmed stations.
Automatic dialing on the portable handset Storing names and telephone numbers in the phonebook Making a voice call using the phonebook 1 Press 1 Press 2 Press 2 Press (Phonebook). 電話帳検索 名 前 ?ア ア ア 登録 名前? “XXX” shows the remaining station numbers you can store. ● You can program up to 150 stations, including 4 preprogrammed stations. 3 Press 名前? page 10 for instructions). 4 Press (Register) twice. 5 Enter the telephone number, up to 30 digits. 登録 . 6 Press (Register).
Sending faxes Sending a fax manually Sending a fax using the phonebook Document Document Control panel cover guide Document guide FACE DO FACE DO WN WN Control panel cover Document 1 Open the control panel cover, and adjust the width of 1 Open the control panel cover, and adjust the width of the document guides to the size of the document. the document guides to the size of the document.
Receiving faxes Receiving a fax manually (AUTO ANSWER off) Receiving a fax automatically (AUTO ANSWER on) Using the main unit: light on 1 If the 1 When you hear a ring, press . (Speakerphone) to answer the call. – document reception is required, – a fax calling tone (slow beep) is heard, or – no sound is heard, ● (Fax). The unit will start fax reception. Using the portable handset: 1 When you hear a ring, lift the portable handset from the charger to answer the call.
Receiving faxes Recording your own greeting message Microphone You can record your own greeting message. When receiving a call, it will be played to callers instead of the pre-recorded Japanese greeting message. 1 Press 2 Press . (Search button) repeatedly until the following is displayed. 3 Press 留 守 番 電 話 の設 定 AAAAAAAAAAA[ SET] . 4 Press (Search button) repeatedly until the following is displayed. 自作応答録音 AAAAAAAAAAA[ SET] 5 Press 6 Press .
Operating the built-in answering device Activating the answering device light on/flash Erasing a specific message Press while listening to the message you want to erase, then press . Erasing all of the recorded messages 1 Press twice. Eras 1 Turn the light on by pressing . 2 When receiving a call, a greeting message will be played and the unit will record a voice message. ● To record your own greeting message, see page 15.
Operating the built-in answering device Operating the answering device from a remote location Preparation: Programming the remote operation ID 1. Press . 2. Press (Search button) repeatedly until the following is displayed. 3. Press 留 守 番 電 話 の設 定 AAAAAAAAAAA[ SET] . 4. Enter any 4-digit number (remote operation ID) except or #. 5. Press (Register). 6. Press . Operation: Listening to a recorded message from a remote location Turn the light on before you go out.
Individual e-mail services Using the e-mail services KME information services Kyushu Matsushita Electric Co., Ltd. (hereafter called “KME”) offers individual information services, such as e-mail. Your fax machine with e-mail features will enable you to send an e-mail to another party’s personal computer (PC) or another e-mail fax machine anywhere in the world through the Internet. Also, you will be able to receive an e-mail from them. The following services are available with your fax machine.
Individual e-mail services Subscribing to KME information services 7 Enter the valid date of your credit card. 有効期限? . . /. . ( 月 /年 ) ■ FACE DO WN Month Year 8 Press . 9 Insert the application form FACE DOWN. 10 Press ● 1 Fill in the included application form. この面を裏向きにして、 矢印の方向へ入れてください。 data communication will start automatically between your unit and KME. ● When you answer this call, the unit will hang up the call and start the data communication automatically.
Individual e-mail services Receiving and printing an e-mail Listening to a received voice e-mail in an attached file 1 Press 1 Press 2 Press ● ● , then press . 2 Press . If there is an e-mail you have not viewed yet, the unit will print the received e-mail. If there is no e-mail, the following will be displayed. ● ~. doc JPEG ● TIFF ● ~. xls ● BMP ● ~. ppt ● TXT ● ~. pdf ● WAV (as of May 2002) ● . (Search button) repeatedly until the following is displayed.
Individual e-mail services Sending a text e-mail from the main unit Sending a fax e-mail Control panel cover FACE DO WN Ajust docu the me guide nt s 1 Press , then press 2 Press . (Search button) repeatedly until the following is displayed. 文 字 Eメ ー ル 送 信 AAAAAAAAAAA[ SET] 3 Press . 4 Enter the desired e-mail address (see the table on page 10 for instructions), then press ● .
Individual e-mail services Sending a voice e-mail Microphone 1 Press , then press 2 Press . (Search button) repeatedly until the following is displayed. 音 声 Eメ ー ル 送 信 AAAAAAAAAAA[ SET] 3 Press . 4 Enter the desired e-mail address (see the table on page 10 for instructions) and press ● . You can select the desired address using the search button. 1. Press (Phonebook), then press (Search button) repeatedly until the desired e-mail address is displayed. 2. Press , then press .
Individual e-mail services Storing another party’s e-mail address in the search button Editing a stored e-mail address 1 Press 1 Press , then press 2 Press (Search button) repeatedly until the following is displayed. 3 Press 4 Press ● . アドレス帳 AAAAAAAAAAA[ SET] "XX" shows the remaining ア ト ゙ レ ス 帳 空 きAxx件 store. You can store up to 30 stations. 名前? >_ 5 Enter the name, up to 20 characters (see the table on page 10 for instructions). 6 Press (Register) twice.
Main unit Specifications Main unit KX-PW100CL Power supply AC 100 V (50 Hz/60 Hz) Power consumption Dimensions (H x W x D) Mass (Weight) Operating environment Portable handset Ni-MH battery (Part no. KX-FAN50) DC 3.6 V, 600 mAh Transmission: Approx. 16 W Reception: Approx. 20 W Copy: Approx. 20 W Stand by: Approx. 1.4 W Maximum(*1): Approx. 125 W Approx. 139 X 358 X 253 mm (without projections and Portable handset) Approx. 186 X 43 X 39 mm Approx.