Facsimile Quick Reference Guide Model No. KX-L6CL KX-L6CW KX-L6CL KX-L6CL has one portable handset. KX-L6CW has two portable handsets. Thank you for purchasing a Panasonic facsimile.
Finding the controls Main unit (control panel) 22 1 23 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 (KX-L6CW is shown.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Liquid crystal display(With color) Volume button adjusts ringer, speaker and handset volume. Fax View button displays received fax List and fax data. Book mark button Mail button Clear button Monitor button starts On-Hook Dialing. Intercom button Copy button starts copying. Start/Fax button starts faxing.
Finding the controls Portable handset 17 1 2 16 3 4 15 5 6 14 1 13 2 3 12 7 8 9 4 11 10 10 11 12 5 9 6 8 13 14 7 15 16 17 Caller information button starts a search in the Number Display log. Hold button puts a call on hold. Redial button redials the last number dialed. Volume button adjusts the volume. Search button changes Hiragana into kanji. Talk button makes/answers calls. Flash button uses the call waiting service. Used when installing additional portable handsets.
Installations and connections Installing the ink film 1 Open the control panel. 4 Insert the white core into the slots shown in the picture below. White core 1 2 Press here. Control panel Open the control panel until it locks. 2 5 2 Insert the ink film. 1 If the ink film is slack, tighten it by winding the “T” shaped gear (blue). “T” shaped gear (blue) Do not be slacken. Find the “T” shaped gear (blue). Ink film 2 Insert the blue core into the right slot of the main unit.
Installations and connections Installing recording paper (A4 size) 1 Install the recording paper tray. 2 Fan the stack of recording paper (A4 size). 3 Insert the recording paper into the recording paper 1 Remove the recording paper cover. 2 Insert the left tab on the recording paper tray into the left slot of the main unit. 3 Insert the right tab into the right slot of the main unit. Recording paper cover Slot tray. (Up to 30 sheets) 1 4 Close the paper entrance cover by leaning it back.
Installations and connections Setting up the portable handset 1 Power outlet (AC 100 V) Charger Connecting the main unit 1 Raise the antenna. AC adaptor 2 place Connect the cord and the handset on the main unit. Plug 2 Battery Click Black Connector Click Red Battery cover 3 Charge the battery in the charger for 10 hours. Click Click 回 (電話 線 停 回線へ) 電 電話 用 機 Charge indicator lights on while charging. Telephone line cord Wall jack 3 cord Connect the telephone line (Supplied accessory).
Setting the date and time Adjusting volumes Main unit Dial keypad 1 Press (Menu) and . ■ Ringer volume 5 levels (including off-position) are available. Press (Volume) repeatedly while the unit is not in use. ■ Handset volume 日付と時刻 ’00年00月00日00：00 年は西暦の下2桁 登 録 は 決定 を押す タ゛イヤルホ゛タンで入力 で移動 2 Enter the correct date (year/month/day) and time (hour/minute). Example: November 1, 2002, 15:30 (3:30 PM) Press . Year Month Day 4 levels are available. Press (Volume) repeatedly during telephone conversation.
Setting your logo and facsimile telephone number 3 Press (Set) twice. 4 Enter your facsimile telephone number, up to 20 digits. Example: 04671234 • • あなたの名前と 電話番号 04671234・・・ 電話番号を入力 し登録する Dial keypad タ゛イヤルホ゛タンで入力 登 録 は 決 定 を押す 1 Press (Menu) and 5 Press . あなたの名前と 電話番号 6 Press 名前を入力する かな漢字 文 字 切 替 は メニューを押す 入力が完了したら 決定 を押す タ゛イヤルホ゛タンで入力 =あ行 =か行… 変換は 押す 確定は 決定 押す 2 Enter your logo, up to 16 characters, using the dial keypad.
Character input and command key table Pressing the dial keys will select a character as shown below.
Automatic dialing on the main unit 5 Press 6 Press Storing names and telephone numbers in the phonebook Dial keypad (Set). (up or down) to select a group number (1–9). 7 Press (Set). 8 Press (Stop) to exit the program. Making a voice call using the phonebook 1 Press 1 Press (Phonebook), (Set). ● You can program up to 150 stations, including 4 pre-programmed stations.
Automatic dialing on the portable handset Storing names and telephone numbers in the phonebook Making a voice call using the phonebook クリアー 内線 切 切 外線 スピーカーホン 1 Press 電話帳 (Phonebook). 電話帳検索 名前？ 2 Press 登録 (Register). “XXX” shows the remaining station numbers you can store. ● You can program up to 150 stations, including 4 preprogrammed stations. ● Press twice for entering English mode. ● 名前? 空 き 999×××件 page 9 for instructions). 登録 (Register) twice.
Intercom between the main unit and portable handset An intercom is available between the main unit and portable handset. Using the main unit: Using the portable handset: 内線 外線 切 Dial keypad 1 Lift the handset. 1 ■ For single portable handset users ■ For single portable handset users Press (Portable handset). Press 内線 (Intercom).
Intercom between portable handsets A 2-way intercom is available between 2 portable handsets. (For KX-L6CL users: An optional handset is needed when using this feature.) Making an intercom call Answering an intercom call Speaker (Back) ト ー ク 1 内線 Pi P eep ! Pi P i Pi! 切 子機間着信 スピーカーホン 子機間通話 Microphone 1 Press 内線 (Intercom) and the desired portable handset number ( to ). Ring Ring! 子機間呼出 2 Listen to the caller.
Sending faxes Sending a fax manually Document guide Sending a fax using the phonebook Document Document guide Document cover FACE D Document Document cover FACE D OWN OWN Handset Handset 1 Open the document cover, and adjust the width of the 1 Open the document cover, and adjust the width of the document guides to the size of the document. document guides to the size of the document.
Receiving faxes You can select beforehand whether to receive faxes by “Receive in memory” or “Receive on recording paper”. Receiving a fax manually (AUTO ANSWER off) Receive in memory: (Default setting) The received fax will be stored in memory. You can check the contents on the display, then print them if necessary. Using the main unit: Receive on recording paper: The received fax will be printed on recording paper. Setting/canceling “Receive in memory” Handset 1 call.
Receiving faxes Viewing faxes stored in memory Information about display ■ To scroll display contents Up Right Left Down Dial keypad 1 While “ファクスを受信しました” (A fax has been received) is displayed, press 1. Press (Menu) and 2. Press (Set). • When “ファクスを受信しました” (A fax has been received) is not displayed, press (Fax list). 2 Press ■ To enlarge or reduce content (up or down) to select the desired fax . (up or down) to select the desired size and (Set).
Receiving faxes Printing a specific fax stored in memory Deleting a specific fax stored in memory Dial keypad 1 While “ファクスを受信しました” (A fax has been received) is displayed, press (Set). • When “ファクスを受信しました” (A fax has been received) is not displayed, press (Fax list). 1 Press 2 Press (up or down) to select the desired fax (up or down) to select the desired fax to delete. 3 Press 2 Press (Fax list). (Menu) and fax). to print.
Receiving faxes Setting ANSWER mode Setting AUTO ANSWER mode Dial keypad light off When AUTO ANSWER mode is off, the unit provides three types of receiving modes: “電話ﾓｰﾄﾞ” (Telephone) mode, “ﾌ ｧ ｸ ｽ 優先” (Fax/Telephone) mode and “ﾌｧｸｽ専用” (Fax only) mode. 1. Telephone mode (電話ﾓｰﾄﾞ) –Pre-selected setting: Select this mode when you plan to answer the calls yourself. When receiving calls, you have to answer all calls manually. 2.
Operating the built-in answering device Activating the answering device To erase all the recorded messsages, press . To stop playing back, press (Stop). Erasing all of the recorded messages 1 Press 2 Press 1 Turn the (Auto answer) light on by pressing 2 When receiving a call, a greeting message will be played and the unit will record a voice message. ● To record your own greeting message, see page 18. . When new messages are recorded, the answer) light will flash.
L-mode service Using L-mode service Setting up L-mode service “L-mode” is a convenient service of NTT offering with web browsing and e-mail. To use L-mode service, please contract with NTT. You should set up your unit before using L-mode service. Application fee Subscription fee/ Installation charge L-mode usage charge 200 yen/month Internet connection charge 100 yen/month Transmission charges ● Free Important: ● You should set up your unit after subscription of “L-mode” service is completed.
L-mode service Sending an e-mail 6 Press Dial keypad (Down) to select the message column, then press (Set). 7 Enter your e-mail message, up to 2000 characters (see the table on page 9 for instructions), then press (Set). メール作成 予約とれたよ 来週日曜 本文を入力する 1 Press (Mail), then press (Set). かな漢字 文 字 切 替 は メニューを押す 宛先 E-mail address メール作成 タ゛イヤルホ゛タンで入力 =あ行 =か行… 入力が完了したら 決 定 を押す 題名 Title 本文 Message 項目を選んで 決定 を押す 送信・保存 は メニュー を押す 2 Press (Set).
L-mode service Storing e-mail addresses in the addressbook Editing/deleting a stored e-mail address You can program up to 150 addresses. Dial keypad 1 Press press (Phonebook) and Dial keypad 1 Press (Menu), then (Set). 2 Enter the name, up to 20 characters (see the table on page 9 for instructions), then press 3 Confirm the kana, then press (Set). (Set). 5 Press 2 Press (up or down) repeatedly until the desired name is displayed.
L-mode service Receiving an e-mail Dial keypad 4 Press ● (Set) to read the e-mail. To print the e-mail, press then press ● (Menu) and , (Set). To delete the e-mail, press (Menu) and , and select “はい” (Yes) for deleting the email. 1 Press ● (L-mode). The new e-mail will be received. 00:00:15 メールメニュー 項目を選んで 決 定 を押す 新規メールを作成 メールを受信する 受信メールの一覧 受信中 001/002 送信済メールの一覧 未送信メールの一覧 定型文の編集 ■ To reply to the e-mail 1. Press 中断 2 When the following is displayed, select “はい” (Yes) and ● (Menu) and .
L-mode service Dial keypad 2 Press (up or down) to select the desired e- mail, then press (Set). 11／ 2 15：30 送信済メール matsushita@ocn… 予約の件 次メール 操作・印刷 は メニュー を押す 予約とれたよ 来週日曜 ■ To print the displayed e-mail Viewing the received e-mail 1 Press Press (Menu) and , then select “はい” (Yes) and press (Mail), then press .
L-mode service Browsing the web using the L-mode menu Browsing the web by entering the URL Dial keypad Dial keypad 1 Press (L-mode), then press . ● The line will be connected to the L-mode gateway. 00:00:30 操作・印刷 は メニュー を押す メインメニュー Lメニューリスト 選べるﾒﾆｭｰﾘｽﾄ 天気予報 タウンページ 今日の チェック 1 Press (L-mode), then press 2 Press (Set) and enter the URL, up to . 500 characters (see the table on page 9 for instructions).
L-mode service Operation on the web ■ To select the item with the radio button 1. Press item. 2. Press (up or down) to select the desired (Set). ■ To scroll display contents Press ■ To select the item by checking the check box (up or down). ■ To browse the web which is linked Press (up or down) to select the desired item (underlined), then press 1. Press (up or down) to select the desired item. (Set). ■ To go back to the previous page Press (left for back). 2. Press (Set).
Main unit Specifications Main unit KX-L6CL /L6CW Power supply AC 100 V (50 Hz/60 Hz) Transmission: Reception: Power Copy: consumption Stand by: Maximum(*1): Dimensions (H x W x D) Mass (Weight) Operating environment Portable handset Ni-Cd battery (Part no. KX-FAN37) DC 2.4 V, 600 mAh Approx. 21 W Approx. 19 W Approx. 20 W Approx. 2.0 W Approx. 100 W Approx. 151 X 344 X 262 mm (without projections) Approx. 378 X 344 X 310 mm (recording paper tray installed, without projections) Approx. 4.
© Kyushu Matsushita Electric Co., Ltd.
