Facsimile Quick Reference Guide Model No. KX-L5CL KX-L5CW KX-L5CL KX-L5CL has one portable handset. KX-L5CW has two portable handsets. Thank you for purchasing a Panasonic facsimile.
Finding the controls Main unit (control panel) 1 2 4 3 5 6 7 8 9 10 11 (KX-L5CL is shown.) 12 1 2 3 4 5 6 7 8 9 10 11 12 2 13 14 15 16 17 Microphone Call indicator Liquid crystal display Memory button & indicator shows the list of received fax data. Call memory button & indicator starts a search in the Number Display log. (For caller ID display service users.) Speed Dial button Auto Answer button —light on: answering device activated. —light off: used as a regular telephone.
Finding the controls Portable handset How to use 再ダイヤル 電話帳 key 音量/変換 電話帳 ● 再ダイヤル ● To redial the last number dialed. ● To adjust the volume. To change Hiragana into Kanji. ● 音量/変換 To use the phonebook. Speaker Call/Charge indicator ● When receiving a call, the indicator will blink. ● When placed on a charger Charging On Full Off LCD (with back light) ● Displays battery strength, telephone numbers etc. 1 外線 ● クリアー ● 内線 2 子機1 To make/answer calls.
Installations and connections Installing the ink film 1 Open the control panel. 4 Insert the white core into the slots shown in the picture below. White core 1 2 Open the control panel until it locks. Press here. Control panel 5 If the ink film is slack, tighten it by winding the “T” shaped gear. 2 Insert the ink film. 1 “T” shaped gear (blue) Find the “T” shaped gear (blue). Do not be slacken. Ink film 2 Insert the blue core into the right slot of the main unit.
Installations and connections Installing recording paper (A4 size) 1 Install the recording paper tray. 1 Remove the recording paper cover. 2 Insert the left tab on the recording paper tray into the left slot of the main unit. 3 Insert the right tab into the right slot of the main unit. 2 Fan the stack of recording paper (A4 size). 3 Insert the recording paper into the recording paper tray.
Installations and connections Setting up the portable handset 1 Power outlet (AC 100 V) Charger Connecting the main unit 1 Raise the antenna. AC adaptor 2 place Connect the cord and the handset on the main unit. Plug 2 Battery Click Black Click Connector Red Battery cover 回 (電話回線 線へ) 停電 電話用 機 3 Charge the battery in the charger for 10 hours. Charge indicator –lights on: while charging. –lights off: charging completed.
Setting the date and time Setting your facsimile telephone number 機 能 機 能 ストップ 1 Press 機能 ストップ (Function) and . 1 Press 機 能 Cursor . 2 Enter your facsimile telephone number, up to 日付時刻 20 digits. Example: 098 765 43 · · Example : 2002年 10月 01日 14：30 あなたの電話番号? 098 765 43・・・. . . . . . . Cursor 3 Enter the correct hour/minute in a 24-hour clock entry. The Example: 15:45 (3:45 PM) Press . 日付時刻 2002年 10月 01日 15：45 4 Press . あなたの電話番号? . . . . . . . . . . . . . . . . . . . . .
Setting your logo Example: Micah 機 能 1. Press once. 名前(印刷用)? M Cursor 2. Press ストップ 1 Press 機能 six times. 名前(印刷用)? Mi 再ダイヤル 電話帳 (Function) and . 3. Press six times. 名前(印刷用)? Mic 名前(印刷用)? 再ダイヤル 電話帳 4. Press to move the cursor to the next Cursor space and press 2 Enter your logo, up to 30 characters, using the dial keypad. ● To enter English characters easily, press (Character input mode) repeatedly and select “半角英字” (English and sign input mode).
Character input and command key table Character Pressing the dial keys will select a character as shown below.
Automatic dialing on the main unit Storing names and telephone numbers in the phonebook Making a voice call using the phonebook 1 Press 2 Press 再ダイヤル 電話帳 (Phonebook). 再ダイヤル 電話帳 (Search button) repeatedly until the desired name is displayed. 3 Lift the handset or press ストップ 再ダイヤル 電話帳 登録 再ダイヤル 電話帳 (Phonebook) and (Register). ● “XXX” shows the number of remaining stations you can store. ● You can program up to 150 stations, including 4 pre-programmed stations. ★★電話帳★★ 電 話 帳 空 き XXX件 (Set).
Automatic dialing on the main unit Storing names and telephone numbers in the speed dialer Making a voice call using the speed dialer You can store up to 9 names and telephone numbers which are stored in the phonebook. The dialing buttons ( to ) function as memory stations. 短縮 短縮 ストップ スピーカーホン 再ダイヤル 電話帳 1 Press (Speed dialer). 2 Press the memory station number ( 短縮 ストップ 再ダイヤル 電話帳 1 Press (Speed dialer). 2 Press the memory station number ( 短縮 1. 2. 3. 4. 5. 6. 未 未 未 未 未 未 登 登 登 登 登 登 to ).
Automatic dialing on the portable handset Storing names and telephone numbers in the phonebook Making a voice call using the phonebook クリアー 内線 切 切 外線 スピーカーホン 1 Press 電話帳 (Phonebook). 電話帳検索 名前？ 2 Press 登録 (Register). “XXX” shows the remaining station numbers you can store. ● You can program up to 150 stations, including 4 preprogrammed stations. ● 名前? 空 き 999×××件 3 Enter the name, up to 20 characters (see the table on page 9 for instructions). 4 Press (Register) twice.
Intercom between the main unit and portable handset An intercom is available between the main unit and portable handset. Using the main unit: Using the portable handset: Handset 内線 切 子 機 スピーカーホン スピーカーホン 1 ■ For single portable handset users 1 2 1 ■ For single portable handset users Lift the handset. 子 機 ● When pressing (Portable handset) without lifting the handset, you can use the speakerphone. Skip step 2 . Press 子 機 Press 内線 (Intercom).
Intercom between portable handsets A 2-way intercom is available between 2 portable handsets. (For KX-L5CL users: An optional handset is needed when using this feature.) Making an intercom call Answering an intercom call Speaker (Back) ト ー ク 内線 1 切 Pi P 子機間着信 eep ! Pi P スピーカーホン i Pi! Microphone 1 Press 内線 子機間通話 (Intercom) and the desired portable handset number ( to ). Ring Ring! 2 Listen to the caller.
Sending faxes Sending a fax manually Sending a fax using the phonebook/speed dialer Document Document guide Document Document guide Document cover Document cover FACE DO WN FACE DO WN 短縮 スタート ファクス スタート ファクス 再ダイヤル 電話帳 1 Open the document cover, and adjust the width of the 1 Open the document cover, and adjust the width of the document guides to the size of the document. document guides to the size of the document.
Receiving faxes You can select beforehand whether to receive faxes by “Receive in memory” or “Receive on recording paper”. Receive in memory: The received fax will be stored in memory. You can check the contents on the display, (Default setting) then print them if necessary. Receive on recording paper: The received fax will be printed on recording paper. ■ Setting/canceling “Receive in memory” ファクス切替 Press : Receive in memory . (Changes each time it is pressed.
Receiving faxes Display when faxes are received in memory Viewing faxes stored in memory ファクス一覧 ストップ ファクス一覧 When new faxes are received in memory, will flash. (Fax list) flash Flashing will stop after all new faxes have been displayed or printed. ファクス一覧 スタート ファクス 1 Press 2 Press 再ダイヤル 電話帳 ファクス一覧 (Fax list). 新規（ ﾏｰｸ）0 2 件 合計0 8 件（ 1 1 ﾍﾟｰｼﾞ） 再ダイヤル 電話帳 (Search 日付 01 9月10日 02 9月10日 03◆ 9月 9日 04 8月25日 05 7月10日 button) to select the desired fax to display.
Receiving faxes Printing a specific fax stored in memory ファクス一覧 ストップ Deleting a specific fax stored in memory ファクス一覧 ストップ 再ダイヤル 電話帳 1 Press (Fax list). 2 ■ To print a specific fax ファクス一覧 1 Press 2 Press Press 再ダイヤル 電話帳 (Search button) to select the desired fax to print, then press 個別印刷 (Print a specific fax). 再ダイヤル 電話帳 ファクス一覧 (Fax list). 再ダイヤル 電話帳 (Search button) to select the desired fax to delete.
Receiving faxes Receiving a fax automatically (AUTO ANSWER on) Setting AUTO ANSWER mode light on light on 機 能 ストップ 1 If the 再ダイヤル 電話帳 (Auto answer) light is off, turn it on by . pressing 2 When receiving a call, the unit will receive a fax document or record a voice message automatically depending on the caller’s request. Recording your own greeting message Handset ストップ You can record your own greeting message.
Operating the built-in answering device Activating the answering device Erasing a specific message 消去 Press (Erase) while listening to the message you はい want to erase, then press (Yes). 機 能 Erasing all of the recorded messages light on/flash 聞き直し/ 通話録音 ストップ 1 Press 2 Press 再ダイヤル 電話帳 1 Turn the (Auto answer) light on by pressing 2 When receiving a call, a greeting message will be played and the unit will record a voice message. ● To record your own greeting message, see page 19.
L-mode service Using L-mode service Setting up L-mode service “L-mode” is a convenient service of NTT offering with web browsing and e-mail. To use L-mode service, please contract with NTT. You should set up your unit before using L-mode service. Application fee Subscription fee/ Installation charge L-mode usage charge 200 yen/month Internet connection charge 100 yen/month Transmission charges ● Free Important: ● You should set up your unit after subscription of “L-mode” service is completed.
L-mode service Browsing the web using the L-mode menu ストップ Browsing the web by entering the URL ストップ 再ダイヤル 電話帳 再ダイヤル 電話帳 決定 1 Press (L-mode), then press . ● The line will be connected to the L-mode center. 決定 接続中 決定 1 Press 決定 2 Press 決定 (L-mode), then press . (L-mode) and enter the URL, up to 500 characters (see the table on page 9 for 登録 ⋮ 2 Press 再ダイヤル 電話帳 instructions), then press (Search button) to select the desired item to browse, then press 決定 URL? http://○○○. co.
L-mode service Operation on the web ■ To select the item with the radio button 1. Press 再ダイヤル 電話帳 desired item. (Search button) to select the 性別を選ぶ 男性 女性 2. Press 決定 (L-mode). 性別を選ぶ 再ダイヤル 電話帳 決定 男性 女性 ■ To scroll display contents Press 再ダイヤル 電話帳 ■ To select the item by checking the check box (Search button). ■ To browse the web which is linked Press 再ダイヤル 電話帳 1. Press 再ダイヤル 電話帳 desired item.
L-mode service Sending an e-mail 6 Press 再ダイヤル 電話帳 (Search button) to select the message column, then press ストップ メニュー 決定 (L-mode). 宛先 ( ｱﾄﾞﾚｽ帳 は [ﾒﾆｭｰ]) yuka@ XXX.ne.jp 題名 予約の件 本文 ( 送 信 は [ﾒﾆｭｰ]) 再ダイヤル 電話帳 決定 1 Press 2 Press 決定 (L-mode), then press 7 Enter your e-mail message, up to 2000 characters (see the table on page 9 for instructions), then press . 登録 決定 (Register). (L-mode).
L-mode service Storing e-mail addresses in the addressbook Editing/deleting a stored e-mail address You can program up to 50 addresses. ストップ 1 Press メニュー ストップ 再ダイヤル 電話帳 1 Press 登録 メニュー (Menu) and , then press (Register). ★ ★ アト゛レス帳 ★ ★ アト゛レス帳 検 索 名前？ アト゛レス帳 空 き 2 Press XX件 2 Press 決定 (Set). Name Kana E-mail address 名前 ﾌ ﾘ ｶ ゛ﾅ ｱ ﾄ ゛ﾚ ｽ 登録 page 9 for instructions), then press (Register). (Search button) to select the e-mail 決定 address column, then press 名前 ﾌ ﾘ ｶ ゛ﾅ ｱ ﾄ ゛ﾚ ｽ (Set).
L-mode service Receiving an e-mail 4 Press メニュー ● 決定 (L-mode) to read the e-mail. To print the e-mail, press and . 決定 ● To delete the e-mail, press and . 決定 ■ To reply to the e-mail メール ストップ 1. Press 再ダイヤル 電話帳 決定 1 Press (Mail) when its indicator is flashing. ● The new e-mail will be received. (Search button) to select the message column (“本文”), then press (L-mode). 登録 決定 (Register). ⋮ (L-mode). ● The connection with the L-mode center will be disconnected. 4.
L-mode service 2 Press 再ダイヤル 電話帳 (Search button) to select the desired e-mail, then press 決定 (L-mode). 09/07 17:45 yuka@ XXX.co.jp 予約の件 メール メニュー 再ダイヤル 電話帳 日曜日の8時に駅前に集合し てください。 会費は、3,000円の予定 決定 Viewing the received e-mail 1 Press メール (Mail), then press . 受信メールの一覧 17：00 予 約 の 件 09/01 こ ん に ち は 08/31 遊 び に 行 こ う 08/25 連 絡 で す : An e-mail which has not been read yet ■ To print the displayed e-mail Press メニュー (Menu) and (L-mode).
Main unit Specifications Main unit KX-L5CL /L5CW Power supply AC 100 V (50 Hz/60 Hz) Transmission: Reception: Power Copy: consumption Stand by: Maximum(*1): Dimensions (H x W x D) Mass (Weight) Operating environment Portable handset Ni-Cd battery (Part no. KX-FAN37) DC 2.4 V, 600 mAh Approx. 20 W Approx. 25 W Approx. 25 W Approx. 1.2 W Approx. 130 W Approx. 139 X 344 X 254 mm (without projections) Approx. 378 X 344 X 301 mm (recording paper tray installed, without projections) Approx. 3.
