Security Camera User Manual

9 of 9
H OME L OGIC C ONFIGURATION D ETAILS
The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.
In the table below:
o “<User Defined>”, etc. Type in the desired name for the item.
O
NE H OME S OFTWARE V ERSION 3.0
Devices Variable Name Setting Comments
Communication Device N/A (See Note 1)
N/A (See Note 1)
Video Cameras Name
<User Defined> (Default:
Panasonic KX/BL/BB Series
)
Device Type Panasonic KX/BL/BB Series
Location
<User Defined> (Not Required)
IP Address
<User Defined> (Default:
192.168.0.80
) (See Note 2)
Notes:
1. No
Communication Device
is needed: just add
Video Cameras
.
2. By default, set the first camera to 192.168.0.80, the second to 192.168.0.81, and so on.
O
NE H OME S OFTWARE V ERSION 4.0
Devices Variable Name Setting Comments
Communication Device N/A (See Note 1) N/A (See Note 1)
Video Cameras Name
<User Defined> (Default:
Panasonic BB-HCM311A,331A
)
Device Type Panasonic BB-HCM311A,331A
Location <User Defined> (Not Required)
IP Address
<User Defined> (Default:
192.168.0.80
) (See Note 2)
Notes:
1. No
Communication Device
is needed: just add
Video Cameras
.
2. By default, set the first camera to 192.168.0.80, the second to 192.168.0.81, and so on.