Quick Reference Manual

2 F
asten the wall mounting adaptor(s) to the base with the screw(s).
(Recommended torque: 0.4 N·m [4.08 kgf·cm] to 0.6 N·m
[6.12 kgf·cm])
3 Connect the cables to the unit, and run the cables through the wall
mounting adaptor, as shown in the illustration below.
4 Drive the screws into the wall either 83 mm or 100 mm apart, and
mount the unit on the wall.
Example: KX-DT543/KX-DT546 with KX-DT590
83 mm
100
mm
4
Washer
Drive the screw
to this point.
222 mm
2
3
40 mm or less
The telephone line cord
23
Wall Mounting