Operation Manual

Troubleshooting
41
If you still experience problems after following these suggestions, please contact our Technical Support Department
at 1-800-726-2797 for further assistance. (U.S.A. only)
Dark spots or noise appear
on the scanned documents.
The scanning glass section is dirty. Clean the scanning glass section
(See page 30).
Scanned image has moire
fringes such as stripe or a
wavy pattern noise.
It is caused by the printing pattern of
the document and the congeniality of
the scanning resolution.
Change the resolution, and try to scan
again.
Symptom Possible Cause Remedy