High Speed Color Scanner Operating Instructions
Table Of Contents
- Table of Contents
- Notice
- For Your Safety
- Component Identification
- Setting up the Scanner
- Installing Software
- Starting the Scanner Applications Automatically
- Document Specifications
- Loading Documents
- Clearing Paper Jams
- Mixed Batch Card Guide
- Cleaning the Unit
- Replacing Consumables
- Removing the Stand
- Repacking Instructions
- Specifications
- Troubleshooting
- Index
37
Removing the Stand
The scanner can be used without the stand depending on the operating conditions.
Follow the steps below to remove the stand from the scanner.
Removing the stand
1
Place the scanner on an even surface
as shown in the illustration, and then
loosen the two screws
counterclockwise.
2
Remove the stand from the scanner.
Note:
• When installing the stand, carry out these steps in reverse order.
Stand