Datasheet

JQ
2
ds_61B03_en_jq: 201112D
RATING
1. Coil data
2. Specifications
* Specifications will vary with foreign standards certification ratings.
Notes:
*1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2. Wave is standard shock voltage of 1.250s according to JEC-212-1981
*3.The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
*4. When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1C 33.8F with 20C
68F as a reference) and use a coil impressed voltage that is within the maximum applied voltage range.
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out
voltage
(at 20C 68F)
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
(at 20C 68F)
Max. applied voltage
1 Form A
5V DC
Standard type:
75%V or less of
nominal voltage (Initial)
High capacity type:
80%V or less of
nominal voltage (Initial)
5%V or more of
nominal voltage
(Initial)
40.0mA 125 
200mW
180% of nominal voltage
(at 20C 68
F)
130% of nominal voltage
(at 70C 158F)
[When using relays at
85C 185F, see Notes*4]
6V DC 33.3mA 180 
9V DC 22.2mA 405 
12V DC 16.7mA 720 
18V DC 11.1mA 1,620 
24V DC 8.3mA 2,880 
1 Form C
5V DC
Standard type:
75%V or less of
nominal voltage (Initial)
High capacity type:
80%V or less of
nominal voltage (Initial)
5%V or more of
nominal voltage
(Initial)
80 mA 62.5
400mW
150% of nominal voltage
(at 20C 68F)
110% of nominal voltage
(at 70C 158F)
[When using relays at
85C 185F, see Notes*4]
6V DC 66.7mA 90 
9V DC 44.4mA 202.5
12V DC 33.3mA 360 
18V DC 22.2mA 810 
24V DC 16.7mA 1,440 
48V DC 8.3mA 5,760 
Characteristics Item
Specifications
Standard type High capacity type
Contact
Arrangement 1 Form A 1 Form C 1 Form A 1 Form C
Contact resistance (Initial) Max. 100m (By voltage drop 6 V DC 1 A)
Contact material AgSnO
2 type
Rating
Nominal switching capacity (resistive load)
5 A 125 V AC,
2 A 250 V AC,
5 A 30 V DC
N.O. side:
5 A 125 V AC,
2 A 250 V AC,
3 A 30 V AC
N.C. side:
2 A 125 V AC,
1 A 250 V AC,
1 A 30 V DC
10 A 125 V AC,
5 A 250 V AC,
5 A 30 V DC
N.O. side:
10 A 125 V AC,
5 A 250 V AC,
5 A 30 V AC
N.C. side:
3 A 125 V AC,
2 A 250 V AC,
1 A 30 V DC
Max. switching power (resistive load) 625 VA, 150 W
N.O. side:
625 VA, 90 W
N.C. side:
250 VA, 30 W
1,250 V AC, 150 W
N.O. side:
1,250 VA, 150 W
N.C. side:
500 V AC, 30 W
Max. switching voltage 250 V AC, 110 V DC (0.3A)
Max. switching current N.O.: 5 A, N.C.: 2 A N.O.: 10 A, N.C.: 3 A
Nominal operating power 200 mW 400 mW 200 mW 400 mW
Min. switching capacity (reference value)*
1
100 mA, 5 V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000 M (at 500 V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1 min. 750 Vrms for 1 min. 1,000 Vrms for 1 min. 750 Vrms for 1 min.
Between contact and coil 4,000 Vrms for 1 min. (Detection current: 10 mA)
Temperature rise (coil)
Max. 45C 113F
(By resistive method, nominal coil voltage
applied to the coil; contact carrying current:
5A, at 70C 158F)
Max. 45C 113F
(By resistive method, nominal coil voltage
applied to the coil; contact carrying current:
10A, at 70C 158F)
Surge breakdown voltage*
2
(Between contact and coil) (Initial)
8,000 V
Operate time (at nominal voltage) (at 20C 68F)
(Initial)
Max. 20 ms (excluding contact bounce time.)
Release time (at nominal voltage) (at 20C 68F)
(Initial)
Max. 10 ms (excluding contact bounce time) (Without diode)
Mechanical
characteristics
Shock resistance
Functional 294 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
Destructive 980 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10s.)
Destructive 10 to 55 Hz at double amplitude of 2.0 mm
Expected life Mechanical (at 180 times/min.) Min. 10
7
Conditions
Conditions for operation, transport and storage*
3
Ambient temperature: –40C to +70C –40F to +158F (class E insulation),
–40C to +85C –40F to +185F*
4
(class B insulation)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed 20 times/min. (at nominal switching capacity)
Unit weight Approx. 7 g .25 oz