User Guide

Section 770-Voice Recognition Telephone Chapter 5.Tuning the Commands to Your Voice
26 ICX issued August 1998 ICX-25-770
5. Say "System".
Voice Guidance responds with "Reset or Train?"
6. Say "Train".
Voice Guidance responds with "Retrain which word?"
• If the Phonebook memory is full
The following message is displayed on the screen and Voice
Guidance says "Phonebook Full sorry". If you want to continue
retraining the commands, you must first delete any unwanted
entries. (See Chapter 4, "Deleting a Phonebook Entry" (page
20).)
7. Say the command you want to train.
Voice Guidance responds with '" " Right?'
Note: You cannot use the following spoken commands: "Go Back",
"Cancel", or "Repeat". Press the Soft Key [EXEC] or Cancel Key.
Example: To train "Complete"
Say "Complete". → Voice Guidance responds with
'"Complete" Right?".
8. If the control command reiterated by Voice Guidance is correct,
say "Yes". If not, say "No".
•"Ye s "
Voice Guidance responds with 'Say " "?'
Example: "Yes" → Voice Guidance responds with 'Say
"Complete"?'
•"No"
Voice Guidance speaks the next control command. After
speaking all the control commands, Voice Guidance says "No
COMMANDS:
Cancel Call Program Change
Go Back Yes No List
Number Delete Name Back Space
Complete Add System Delete All
Train Reset Repeat
SYSTEM
RESET TRAIN
WORD TO TRAIN ?
GO BACK
PHONEBOOK FULL
TRAIN GO BACK
NO YES
ADAPTING #1
GO BACK