Operating instructions

ICX-40-200 ICX (International) issued December 1999 27
Section 200 - General Description Chapter 2 - System Hardware
Only one Built-In Voice Mail can be installed in a single cabinet. A maximum of four Built-In Voice
Mails can be installed in a system. Built-In Voice Mail and Built-In ACD cannot be installed in the
same cabinet, since they use the same flexible slots.
SCC Unit (VB-44181)
The Service Circuit Card provides enhanced service functions such as two RS232C ports (9600bps),
a Background Music input, and the external paging control.
Only one Service Circuit Card can be installed in a system.
RS232C port: 2 ports (maximum 9600bps)
BGM input terminal: 1 port (with RCA jack)
On/Off control of the external amplifier: One contact
Number of contacts for on/off control of external equipment: 5 contacts
Maximum current of control board: .25mA (total charge)
Power Failure Transfer Unit (VB-43703)
The four-line power failure transfer is designed to switch outside dial tone from the telephone
company direct to a single line telephone when power is lost. The power failure transfer unit connects
four SLTs to four CO lines.
1 Line SLT Adaptor (VB-44100)
By connecting the 1 line SLT Adaptor to the DEC/8 card, you can connect an SLT instead of an
extension keyphone. One SLT can be connected to one 1 line SLT Adaptor unit.
STATION EQUIPMENT
Overview
The full line of Panasonic ICX phone systems offer a wide variety of critically acclaimed telephones.
All telephones work with all models of ICX systems.
As the user interface, the station instrument is a crucial element of the communications system. All
ICX telephones are designed to provide easy access to system features and functions. A mixture of
fixed and programmable feature keys allow the station to be specifically customized to accommodate
the needs of each user. A wide variety of telephones are offered with different combinations of
programmable keys, speakerphones, and liquid crystal displays to provide a complete solution to any
telecommunication requirement. The advanced economic design and quality manufacturing assure
longevity of the ICX system and stations, protecting the investment of the end-user.
All telephones are designed with the following features:
❑
Key lettering is a part of the key mold, making it impossible for lettering to
fade or rub off.
❑
Special film coating enables displays to be seen under extremely bright
lighting conditions.
❑
Adjustable display contrast levels adapt to different lighting conditions.
❑
Adjustable base for 3 different LCD viewing positions.
❑
Photo optic controlled hookswitch, which extends the life of the
hookswitch.