GENERAL DESCRIPTION

ICX-35-200 ICX35/May/1999 43

Section 200 - General Description Chapter 3 - System Features

SMDR Output Data Format

Condition Code:

Call Start Time (Month/Day, Hour:Minute:Second)

Call Duration Time (Hours:Minutes:Seconds)

Trunk User No. (Internal Line No. 0 to 9999, or Trunk No. C1 to C576)

Trunk No. (1 to 576, or *1 to *576 when trunk is disconnected while the call is on hold)

Dialed No. (24 digits max., including 0-9, *, #. Hidden numbers will appear as * instead of digits.

Format #2 only: “I” precedes digits for incoming calls. Security/Access Codes will not appear as

dialed digits.)

Account Codes (Unverified: 10 digits max., or Verified: either first 4 digits, or Code Progmming Table

No. V001-V500)

DISA Security Code (Pgming Table No. D001-D016)

Caller Data (Format #2 only)

ISDN Charge Data (Format #2 only -- Not Used/for future use)

Call Ringing Duration (Format #2 only; includes abandoned calls)

Carriage Return Line Feed

NOTE: Centrex and PBX codes, DISA security codes, and ARS access codes will not appear as

dialed digits.

INCOMING CALLS: OUTGOING CALLS:

I Incoming Call F Call Forward Outside

D DID Incoming Call H Hold Outgoing Call

h Hold Incoming Call L LCR Outgoing Call

N Network Incoming Call O Outgoing (non-LCR) Call

S DISA Incoming Call T Transfer Outgoing Call

t Transfer Incoming Call W Closed Numbering Outgoing Call

A Abandoned Incoming Call

Format #1

T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvvH

Format #2

T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvv

dddddddddddddddd cccccccc MM:SSH

6 754321 8

11109