GENERAL DESCRIPTION

32 ICX35/May/1999 ICX-35-200

Chapter 2 - System Hardware Section 200 - General Description

PROG Key Used to program Flexible Function (FF) and one-touch keys, to adjust

ringer volume, and to send a flash signal. Depending on the setup of

your system, may also be used to transfer calls.

CONF Key Used to establish conference calls and to check FF key and one-

touch features.

One-Touch Keys Used to make outside calls or to access system features.

Flexible Function (FF) Keys Used to access outside lines or to access system features.

DND/CF Indicator Indicates that Do-Not-Disturb (DND) or Call Forwarding is set.

EXT Indicator Lights when you are on a call and flashes when you hold a call.

MIC Indicator Indicates that your microphone is activated. Lights solid when your

hands-free microphone is activated.

ON/OFF Indicator Lights when the ON/OFF key has been pressed.

FL/R Key Used to end an outside call and to either restore outside dial tone or

switch to external dial tone status without hanging up the receiver.

REDIAL Key Used to redial the last number dialed.

MEMORY Key Used to access speed dialing or enter account codes.

ON/OFF Key Used to make a call without lifting the handset or to turn the speaker

on and off.

LINE Key Used to seize a free line from MCO outgoing group.

VOLUME Key Used to adjust the level of tones, background music, ringing, receiver

volume, and display contrast.

HOLD Key Used to hold calls, to retrieve held calls, and to complete FF key

programming.

Microphone Used to talk to another party without using the handset.

Speaker Outputs tones and voice at your extension.

No. Feature Description