GENERAL DESCRIPTION
ICX-35-200 ICX35/May/1999 23
Section 200 - General Description Chapter 2 - System Hardware
DID Trunk Card - DID (VB-44520) (HK only)
This card supports 8 DID incoming CO lines using Immediate and Wink signaling methods. The DID
can be either Dial Pulse (10PPS) or DTMF (only for Wink). MFR circuits are used when the Wink
method is selected.
An internal -48V Power Supply (VB-44022) must be installed in the same cabinet with the E&M Trunk
Card.
A lightning arrester is built into the DID TRK card.










