Operating instructions

ManualsBrandsPanasonic ManualsTelephoneICX

ICX - 4.5

Issued June 2000

Summary of content (91 pages)

PAGE 1
ICX - 4.
PAGE 2
Matsushita Communications Industrial Co., Ltd (MCI) The contents of this document are subject to change without notice and do not constitute a commitment on the part of Matsushita Communications Industrial Co, Ltd (MCI) Every effort has been made to ensure the accuracy of this document. However, due to ongoing product improvements and revisions, Panasonic cannot guarantee the accuracy of printed material after the date of publication, nor can it accept responsibility for errors or omissions.
PAGE 3
PAGE 4
CHAPTER 1 - SYSTEM OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Introducing the Next-Generation Phone System from Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 System Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Programming the phone system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 5
MFR Card (VB-44110) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-Party Conference Card (VB-44120) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-In ACD Card (VB-44140). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-In Voice Mail Voice Storage Card (VB-44170). . . . . . . . . . . . . . . . . . . . . .
PAGE 6
“Howler” Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multiple Direct Inward Dial (DID) Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recall Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
Off-Hook Signaling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . On-Hook Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Off-Hook Voice Announce (OHVA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . One-Touch Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 8
Signaling to CO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Transmission Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 DTMF Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
8 ! Table of Contents ICX (International) issued June 2000
PAGE 10
Section 200 - General Description Chapter 1 - System Overview CHAPTER 1 - SYSTEM OVERVIEW INTRODUCING THE NEXT-GENERATION PHONE SYSTEM FROM PANASONIC Our telephony customers know what they’re looking for -- real product solutions to meet the very real demand for an effective, responsive, user-friendly telephone system. They know that the phone system is their most important link to the outside world -- and often their “welcome mat” for it. They’re dead in the water without a good one.
PAGE 11
Chapter 1 - System Overview Section 200 - General Description ❑ Universal ports. The ICX offers flexible slot configuration. You can mount Trunk or Extension Cards in any of the 12 Free Slots in the cabinet. (CPC cards and option cards have their own designated slots.) Trunk and Extension Cards are not limited to a particular slot assignment; you mount them where you want them. Then tell the system (in programming) how each slot is configured. You control the system; the system doesn’t control you.
PAGE 12
Section 200 - General Description Chapter 1 - System Overview Panasonic also offers proprietary software for a PC Phone, which replaces the desktop extension phone. End-users can control their own phone calls using the computer. ❑ Networking services. The ICX offers several ways to set up networking -- tying multiple ICX systems together through the public switching network. AC15/E&M Tie Lines let you connect directly to another ICX system using a leased voice line.
PAGE 13
Chapter 1 - System Overview Section 200 - General Description Diagnostics Maintenance The printed circuit board (PCB) cards are designed to slide easily into slots within the ICX cabinet. By using diagnostic troubleshooting, small problems can be isolated to specific cards. Some cards are designed to be installed and extracted from slots without turning off the power, allowing system maintenance to be completed without interrupting the entire system.
PAGE 14
Section 200 - General Description Chapter 1 - System Overview SUPPORTING DOCUMENTATION Panasonic provides extensive documentation for the ICX, including the following manuals. Section 300 - Installation This manual provides hardware installation instructions for the main components of the ICX. (Additional reference manuals, listed below, may be required for optional equipment.) Section 400 - Programming This manual is a general reference for programming the ICX using a display phone.
PAGE 15
Chapter 1 - System Overview Section 200 - General Description Section 751 - Digital Key Phone/DSLT Quick-Reference This is a quick-reference guide for Digital Key Telephones and DSLTs (Digital Single-Line Telephones). It covers only the most commonly-used features, and is intended for the end-user. Section 752 - SLT Phone Quick-Reference This is a quick-reference guide for Analog devices such as the SLT phone. It covers only the most commonly-used features, and is intended for the end-user.
PAGE 16
Section 200 - General Description Chapter 2 - System Hardware CHAPTER 2 - SYSTEM HARDWARE OVERVIEW This section describes the purpose and functionality of the main components of the system. By understanding how these components work, you can easily configure a system that meets your specific needs. This section is divided into the following categories: Cabinets The ICX cabinets are explained in detail below. Both the base cabinet and the expansion cabinet share the same PCB cards.
PAGE 17
Chapter 2 - System Hardware Section 200 - General Description System Connections (trunks, extensions, peripheral equipment) 16 ICX (International) issued June 2000 ICX-4.
PAGE 18
Section 200 - General Description Chapter 2 - System Hardware CABINETS CAB-40 Base Cabinet (VB-44010) Each CAB-40 Base cabinet supports up to 40 ports using flexible or universal card slots. Dual system connection (CAB-40 + CAB 40) is available using connection cable kit. Multiple slot types are used in the CAB-40 Base cabinet. These slot types are as follows: Slot type # of slots Unit type to be installed Power slot 1 Accommodates the cabinet power supply.
PAGE 19
Chapter 2 - System Hardware Section 200 - General Description CAB-96 Base Cabinet (VB-44020) Each CAB-96 Base cabinet supports up to 96 ports using flexible or universal card slots. Up to two CAB-96 Base cabinets can be installed in a system. Multiple slot types are used in the CAB-96 Base cabinet. These slot types are as follows: Slot type # of slots Unit type to be installed Power slot 1 Accommodates the cabinet power supply. The power supply comes installed in the cabinet.
PAGE 20
Section 200 - General Description Chapter 2 - System Hardware CAB-96B Expansion Cabinet (VB-44021) Each added CAB-96B Expansion cabinet expands the system capability by an additional 96 ports. One or two CAB-96B Expansion cabinets can be installed on top of a CAB-96 Base cabinet. Up to four CAB-96B’s can be installed in a fully equipped, 6-cabinet system. Multiple slot types are used in the CAB-96B Expansion cabinet.
PAGE 21
Chapter 2 - System Hardware Section 200 - General Description CONTROL UNIT CPC-96 (VB-44410) The CPC-96 supports a single cabinet (40/ 96ports) and utilizes a 16-bit Central Processor Unit (CPU).
PAGE 22
Section 200 - General Description Chapter 2 - System Hardware Time Switch - TSW-288 (VB-444202) The TSW-288 provides the time switch circuitry required for up to 288 ports. This card must be used with the CPC-288. This unit installs in the first option slot of the first Base cabinet. Only one card can be installed in a system.
PAGE 23
Chapter 2 - System Hardware Section 200 - General Description Connecting CAB40 Dual system Building Block Expansion Cable Kit - CBL (VB-44451) This card supports the interconnection between cabinets when multiple cabinets are used. This card establishes the connection between PCM-HW bus and terminal control bus of the Base cabinet and additional cabinets, as well as the connection to the time switch unit (TSW-288/TSW-576) in the first Base cabinet. Each cabinet after the first cabinet requires a CBL kit.
PAGE 24
Section 200 - General Description Chapter 2 - System Hardware NOTE: The ICX-to-DBS configuration can support a maximum of 528 ports, including the ports in the DBS cabinet. A maximum of two DBS cabinets can be included in the configuration. DBS DEC (Digital Extension Cards) are supported, but there is no DBS TRK (trunk) card support. A special MDF board is required; it is included with the CBLDBS kit. The CBLDBS card installs in the AUX1 slot of each connected DBS cabinet.
PAGE 25
Chapter 2 - System Hardware Section 200 - General Description ISDN Primary Rate Interface Card (T-point) - PRI (VB-44540) T-point primary rate interface requires a DSU for connection to the carrier circuit. A Network Sync card is also required. A lightning arrester is built into the PRI card. This supports T-point Integrated Services Digital Network (ISDN) Primary Rate Interface (PRI) (23B+D/24B:1544kbps) (30B+D/31B:1984kbps) and also S-point ISDN Primary Rate Interface.
PAGE 26
Section 200 - General Description Chapter 2 - System Hardware DID Trunk Card - DID (VB-44520) (HK only) This card supports 8 DID incoming CO lines using Immediate and Wink signaling methods. The DID can be either Dial Pulse (10PPS) or DTMF (only for Wink). MFR circuits are used when the Wink method is selected. An internal -48V Power Supply (VB-44022) must be installed in the same cabinet with the E&M Trunk Card. A lightning arrester is built into the DID TRK card.
PAGE 27
Chapter 2 - System Hardware Section 200 - General Description External safety devices (available from standard telecommunications suppliers) are required when installing this unit outside the building. Primary Rate Interface Card (S-point)-PRI (VB-44540) Same card as T-point. One-Line SLT Card (VB-43702UK/HK) Analog Single Line device can be connected to DEC card through this interface card.
PAGE 28
Section 200 - General Description Chapter 2 - System Hardware Analog Extension Interface Card - APEC/8 (VB-44660UK) The APEC/8 card serves as an interface card for the SBS proprietary key telephone. Voice Processing Card (4 circuits) (VB-44160) Two sizes of voice processing cards are available for use with the ICX. The VB-44160 voice processing card contains four voice processing circuits and can be used with Built-In Voice Mail and Built-In ACD.
PAGE 29
Chapter 2 - System Hardware Section 200 - General Description STATION EQUIPMENT Overview The full line of Panasonic ICX phone systems offer a wide variety of critically acclaimed telephones. All telephones work with all models of ICX systems. As the user interface, the station instrument is a crucial element of the communications system. All ICX telephones are designed to provide easy access to system features and functions.
PAGE 30
Section 200 - General Description • • • • • • • • • • UK, HK: Taiwan: Chapter 2 - System Hardware 12 key-Standard 12 key-Speakerphone 12 key-Display Speakerphone 12 key-Large Display Speakerphone 12 key-Soft key Display Speakerphone 24 key-Display Phone 24 key-Display Speakerphone EM24-24 key Expansion Module DSS-72 Key DSS/BLF Digital Single Line telephone VB-44220TX VB-44221HK VB-44223TX/HK VB-44225TX/HK VB-44224HK/TX --VB-44233TX/HK VB-44310HK VB-44320HK VB-41200TX/HK VB-D411UK --VB-D411DSUK VB-D4
PAGE 31
Chapter 2 - System Hardware Section 200 - General Description 12 Key Display Speakerphone (VB-44223/VB-D411DS) Provides 12 flexible feature/line keys (dual coloured LED) and 10 personal speed dial keys with an integrated handsfree speakerphone and 2 line liquid crystal display(LCD). 4 programmable soft keys are included with the display to provide access to advanced system features. Supports handsfree answerback on intercom, off hook voice announce, and headsets. Requires one digital port. Wall-mountable.
PAGE 32
Section 200 - General Description Chapter 2 - System Hardware 24 Key Display Phone- (VB-D611D) Provides 24 flexible feature/line keys (dual coloured LED) and 10 personal speed dial keys with an integrated handsfree speakerphone and 2 line liquid crystal display(LCD). Supports handsfree answerback on intercom, off hook voice announce, and headsets. No Speakerphone. Requires one digital port. Wallmountable.
PAGE 33
Chapter 2 - System Hardware Section 200 - General Description OPTIONAL TERMINAL DEVICES Voice Recognition Unit Adapter (VB-44101) Working in conjunction with the 12 key Display Speakerphone with Voice Response Telephone (VB44224), this adapter adds voice response functions to the telephone. The user can program the telephone to automatically dial numbers based on the user’s voice commands.
PAGE 34
Section 200 - General Description Chapter 2 - System Hardware TELEPHONE KEY LAYOUT 12-Key Small-Display Telephone key layout Small-Display Telephone Features No. Feature Description 1 Message Waiting Indicator Indicates that you have a message. 2 Display Displays information about the phone’s status, menus, and dialling directories. 3 MODE Key Used to change display modes from Default Mode to Speed Dial Mode or Extension Directory Mode.
PAGE 35
Section 200 - General Description No. Chapter 2 - System Hardware Feature Description 6 PROG Key Used to program Flexible Function (FF) and one-touch keys, to adjust ringer volume, and to send a flash signal. Depending on the setup of your system, may also be used to transfer calls. 7 CONF Key Used to establish conference calls and to check FF key and onetouch features. 8 One-Touch Keys Used to make outside calls or to access system features.
PAGE 36
Chapter 2 - System Hardware Section 200 - General Description 12-Key Large-Display Telephone key layout Large-Display Telephone Features No. 35 Feature Description 1 Message Waiting Indicator Indicates that you have a message. 2 Display Displays information about the phone’s status, menus, and dialing directories. 3 Soft Keys Used to select menus, directories, speed dial numbers, and to access call-handling features.
PAGE 37
Section 200 - General Description Chapter 2 - System Hardware No. Feature Description 6 MIC Key Used to turn on the microphone to answer back with hands-free. 7 MENU Key Used to return to the default Main Menu screen which contains the following items: • Personal Dial • System Dial • Extension • Function System • Function Ext 8 PREV Key Used to return to the previous screen. 9 NEXT Key Used to advance to the next screen.
PAGE 38
Section 200 - General Description Chapter 3 - System Features CHAPTER 3 - SYSTEM FEATURES OVERVIEW This chapter describes the numerous system-wide features that are available with the ICX. The first part of this chapter highlights the most popular features in alphabetical order. Following these highlights is a complete list of system features and the ICX versions to which they apply.
PAGE 39
Chapter 3 - System Features Section 200 - General Description and out of any one of these modes at a preset time each day. Weekends, holidays, and other special days can also be programmed with their own separate modes. Benefits: • Enables the system’s ringing and dialling capabilities to change automatically when the mode is switched.
PAGE 40
Section 200 - General Description Chapter 3 - System Features CALLER ID (CID) Description: Caller Identification (CID) is an optional service offered by your local telephone company which adds the following functions to a display phone: ❑ LCD indication of caller information. Users can see calling number information displayed while an incoming call rings at their extension. If the user receives another call during a conversation, caller ID information is presented on the second line of the display.
PAGE 41
Chapter 3 - System Features • Section 200 - General Description Allows computer applications to control telephone operation CONFERENCING Description: A user can conference up to three parties per conference or with additional hardware, up to eight parties per conference. Since the system is digital, there is no internal dB loss. However, additional dB gain/loss settings can be programmed for conference calls. The ICX offers two types of conference calls.
PAGE 42
Section 200 - General Description Chapter 3 - System Features DIRECT INWARD SYSTEM ACCESS (DISA) Description: Any number of CO lines can be assigned to DISA lines which after being accessed, will enable the incoming caller to dial any extension within the system. Or, if the proper security code is entered, the caller will be able to access outside lines. Remote programming can also be done over these lines after entering a password.
PAGE 43
Chapter 3 - System Features • Section 200 - General Description Companies with separate departments or large, open bullpen areas FLEXIBLE DIAL PLAN Description: The ICX’s dial plan is flexible. This means that the system comes with a default set of feature codes, which can be changed. (For example, the default Call Forward-All Calls feature code is 721. But you can change it to 7, or 2#, or ***, or anything else between 1 and 4 digits long.
PAGE 44
Section 200 - General Description Chapter 3 - System Features ❑ Pilot Terminal hunting. When a call is directed to the pilot number of the hunt group, Member #1 is tried first. Hunting proceeds forward through the sequential members to the end of the hunt group. If Member #20 (last member) doesn’t answer, the call then returns to Member #1 again, and the hunt cycle is repeated until a member answers the call. ❑ Pilot Distributed hunting.
PAGE 45
Chapter 3 - System Features Section 200 - General Description RECALL TIMERS Description: The ICX is equipped with various system-wide recall timers that help direct unanswered (maybe forgotten) calls to someone who can answer them: ❑ Start Recall from Hold - how long a call will remain on hold before recalling (ringing at) the extension, SLT, or Attendant that put it on hold. Each of these destination types has its own separate recall timer.
PAGE 46
Section 200 - General Description Chapter 3 - System Features SMDR Output Data Format Format #1 T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvvH 3 2 1 4 6 5 7 8 12 Format #2 T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvv 1 3 2 4 5 6 7 8 dddddddddddddddd cccccccc MM:SSH 10 9 1 11 Condition Code: INCOMING CALLS: I D h N S t A 2 3 4 5 6 7 8 9 10 11 12 12 Incoming Call DID Incoming Call Hold Incoming Call Network Incoming Call
PAGE 47
Chapter 3 - System Features Section 200 - General Description If the Caller ID Feature is installed and enabled, “Private” will appear for calls with restricted Caller ID display. “Out of Area” will appear for long-distance calls that do not provide Caller ID information. Benefits: • • • • • Provides accounting management tool for allocation of telephone expenses. Identifies areas for system or feature upgrade.
PAGE 48
Section 200 - General Description Chapter 3 - System Features STATION TIMER CLASS Description: Depends on Extension Timer Class, the timer for Hold Recall, Transfer Recall, Extension Call Park recall, Call Forward No Answer Timer can be programmed. Maximum 8 extension Timer Class are available. Benefits: • Extension basis, different time can be selected.
PAGE 49
Chapter 3 - System Features Section 200 - General Description UNIVERSAL NIGHT ANSWER TO PAGE Description: During night mode, Universal Night Answer (UNA) sends incoming calls for selected trunks to ring external paging speakers. UNA calls can be picked up from any extension, provided the extension’s Class of Service (COS) allows UNA answer. Users can also program this feature to ring both external paging speakers and specified extensions.
PAGE 50
Chapter 3 - System Features Section 200 - General Description List of Available System Features System Feature Notes Alarm Ringing to alert other users of unanswered calls Alarm Tone to alert the user of a lengthy CO call Analog (AEC) Disconnect Signal for quick-disconnect from 3rd-party Voice Mail systems Analog Device Compatibility Attendant Group 49 up to 20 phones per Att.Group; each system mode (Day1, Day2, and Night) has its own Att.Group ICX (International) issued June 2000 ICX-4.
PAGE 51
Section 200 - General Description Chapter 3 - System Features System Feature Notes Auto Day/Night Mode system automatically switches models at preset times Automatic Route Selection (ARS) least cost routing Automatic Trunk-to-Trunk Transfer automatically connect two outside calls together Background Music (BGM) / Music-on-Hold (MOH) Separation a different music source for each Battery Backup can support the phone system for up to 30 minutes at a time Behind PBX/Centrex Compatibility BLF Ringin
PAGE 52
Chapter 3 - System Features 51 Section 200 - General Description System Feature Notes Flexible Station Functions (available on large-display phones only) Flee Slot Configuration most cards can be installed in any flexible slot Hot Line up to 20 phones can be programmed to automatically call another extension or SSD when the user goes off-hook Howler Tone an alarm for abnormally long off-hook/dial-tone conditions Hunt Groups Pilot No.
PAGE 53
Section 200 - General Description Chapter 3 - System Features System Feature Notes Tandem Connection E&M and AC15, Q-sig Telephone Programming (available on display phones only) TRS (Tall Restriction Service) Outgoing calls can be allowed/blocked based on the path (originating ext.
PAGE 54
Chapter 3 - System Features 53 Section 200 - General Description ICX (International) issued June 2000 ICX-4.
PAGE 55
Section 200 - General Description ICX-4.
PAGE 56
Section 200 - General Description Chapter 4 - Station Features CHAPTER 4 - STATION FEATURES OVERVIEW This chapter describes the many features that end-users can perform on ICX station phones. Some of the most popular functions are highlighted below. A complete list of Station Features is included at the end of this chapter. POPULAR SYSTEM FEATURES ABSENCE MESSAGE Description: Extension users can leave text messages on their phones when they are away.
PAGE 57
Chapter 4 - Station Features Section 200 - General Description Benefits: • • • • Provides a way to allocate telephone expenses (outgoing calls) to specific clients/ departments as a cost accounting tool. Doesn’t limit the expense allocation by phone; the Account Codes are specific to the phone users, not to the phones. Displays the entered Account Code on the phone’s LCD, allowing the user to verify it immediately.
PAGE 58
Section 200 - General Description Chapter 4 - Station Features Benefits: • • The Attendant position isn’t limited to just one phone. Different phones can act as the system operator position, depending on the time of day. Other phones can serve as backup positions for the Attendant phone. AUTO-REPEAT DIALLING Description: If a user places an outside phone call and gets a busy tone, he/she can stay on the line and press REDIAL.
PAGE 59
Chapter 4 - Station Features • Section 200 - General Description Provides a way to establish a 3-party conference between two users and an outside party, or between three users. CALL DURATION DISPLAY Description: The length of a call in progress (minutes and seconds) is tracked and displayed on the phone’s LCD. Benefits: • Users can tell how long they’ve been on a call -- and what the SMDR report is going to show for that call.
PAGE 60
Section 200 - General Description Chapter 4 - Station Features If the parked call isn’t picked up, a programmable timer determines when it will return to the original extension. Benefits: • • Better call handling capabilities. When a party cannot be reached at his/her phone, a user can “park” the call and page the party to pick up the call.
PAGE 61
Chapter 4 - Station Features Section 200 - General Description To pick up a camped-on call, either hang up from the current call and then go off-hook again, or put the current call on hold. You’ll be automatically connected to the caller. Benefits: • Users only have to call a busy extension once. They don’t have to wait for the station to become free, or interrupt the current call, to transfer a waiting call to it.
PAGE 62
Section 200 - General Description Chapter 4 - Station Features Applications: • Users dialling into a Voice Mail or Auto-Attendant system on a DP trunk. They’ll need to switch to DTMF signaling to select Voice Mail options by dialing numbers on the phone when prompted. (for example, they’ll hear: “To reach Sales, press 1. To reach Purchasing, press 2.”) DSS/BLF KEYS Description: With the Direct Station Select/Busy Lamp Field feature, a phone’s FF-key can be programmed to represent another extension.
PAGE 63
Chapter 4 - Station Features • • • • • Alarms Answer Key Barge-In BGM Call Forwarding Section 200 - General Description • • • • • Direct Appearing CO Lines Direct Call Pickup DND DSS/BLF Group Call Pickup • • • • • Message-Waiting Send Multiple CO Line Access Mute Key Night Mode Paging • • • • • Station Lockout Switch to Voice Calling Transfer Key Voice Mail Access UNA Pickup Benefits: • • Flexibility to custom-configure a telephone to suit the individual user’s needs.
PAGE 64
Section 200 - General Description Chapter 4 - Station Features Benefits: • • You can limit the number of people who can pick up a call on hold. You can allow anyone to be able to pick it up, no matter where it’s put on hold. HOT DIAL PAD Description: A user can simply walk up to a digital phone and start dialing without picking up the headset. The call immediately switches to the phone’s speaker, and the entire call can be conducted on it.
PAGE 65
Chapter 4 - Station Features Section 200 - General Description Benefits: • A more polite, less urgent way to ask someone to call you back, when they get a minute. Applications: • Voice Mail. Whenever the user gets a new message in his/her mailbox, this is how the phone lets them know. MUTE Description: Mute is often used as an alternative to putting a caller on hold. Say a station user is on a call. The boss walks up and start silently mouthing words to the user.
PAGE 66
Section 200 - General Description Chapter 4 - Station Features OFF-HOOK SIGNALING Description: This applies to calls with multiple-line appearances (those calls that ring on multiple phones). Off-Hook Signaling sends a tone to a busy extension to indicate that another CO call has arrived. Off-Hook Signaling applies to direct calls, Automatic Camp-Ons, and Manual Camp-Ons. Benefits: • The user knows when a second or third call is ringing in (especially helpful for the Attendant).
PAGE 67
Chapter 4 - Station Features Section 200 - General Description Benefits: • Gives users many one-touch options for performing features such as CO line access, camp-ons, barge-ins, etc. PAGING Description: The ICX allows users to make both internal pages (heard on phone speakers) and external pages (heard over a loudspeaker system). Users can respond to pages for calls on hold with Meet-Me Answer.
PAGE 68
Section 200 - General Description Chapter 4 - Station Features SPEED DIALING Description: Users can program any of their one-touch keys for speed-dialing. There’s Personal Speed Dial codes which can be different on each extension (up to 20 SSDs per phone). There’s also System Speed Dial codes (up to 800) that can be used by everyone. Some of the wonderful things you can do with these speed-dial codes in programming: ❑ Set individual extensions to be able to override TRS restrictions with SSD numbers.
PAGE 69
Chapter 4 - Station Features Section 200 - General Description Benefits: • Provides efficient, user-friendly call handling capabilities. WALKING TRS Description: By entering a Walking TRS(Toll Restriction Service) code on any phone, a station user can temporarily have access to the less-restrictive call capabilities of his/her own phone.
PAGE 70
Section 200 - General Description Chapter 4 - Station Features Station Feature Notes Direct CO Line Answer Users can select a specific trunk to answer an incoming call.
PAGE 71
Chapter 4 - Station Features 70 Section 200 - General Description Station Feature Notes Off-Hook Monitoring press ON/OFF to put an outside caller on speaker, and continue to conduct the call through the handset (outside caller can only hear through the handset) Off-Hook Signaling phone “beeps” to alert user of another incoming call Off-Hook Voice Announce intercom calls on speaker; originate and receive On-Hook Dialing via ON/OFF key, or Hot Dial Pad One-Touch Keys for feature access/execution
PAGE 72
Section 200 - General Description Chapter 5 - Special Applications CHAPTER 5 - SPECIAL APPLICATIONS OVERVIEW The ICX is designed to accommodate a wide variety of features as described throughout this document. However, this powerful phone system is also designed to support fast-emerging technological trends and specialized 3rd-party product integrations. Listed below are some examples.
PAGE 73
Chapter 5 - Special Applications Section 200 - General Description up their calls. Network users can also turn a long-distance call into a local one, by accessing another (long-distance) node and then dialing the (local) number. These powerful networking functions are facilitated by the following ICX hardware connections: ❑ AC15/E&M Tie Lines. Multiple ICX sites can be connected over leased voice lines.
PAGE 74
Section 200 - General Description • • Chapter 5 - Special Applications Windows-compatible mouse 1 spare ISA expansion slot PC Phone Connectivity PC ATTENDANT CONSOLE The PC Attendant Console is for the receptionist/operator position. It is designed to replace the DSS/72 console & keyphone combination that’s commonly used as the Attendant.
PAGE 75
Chapter 5 - Special Applications • • • • • • Section 200 - General Description an 80486 or compatible processor, running at 33 MHz or higher 8MB of RAM 1.44MB (3-1/2”) floppy disk drive Microsoft Windows Version 3.1x (using Win 32s), Windows 95, or Windows NT Version 3.51 Windows-compatible mouse 1 spare ISA expansion slot System Requirements for PC Attendant Console/384 • CPC-96, CPC-288, or CPC-576 (all versions) • an 80486 or compatible processor, running at 33 MHz or higher • 8MB of RAM • 1.
PAGE 76
Section 200 - General Description Chapter 5 - Special Applications VOICE MAIL With the ICX, Voice Mail can either be built-in (installed and programmed internally) or built-out (a third-party application hooked up to the phone system). Both are explained below. BUILT-IN VOICE MAIL WITH 2-WAY CALL RECORDING The ICX’s Built-In Voice Mail option provides simplified Voice Mail functionality. Hardware for this option is installed inside the ICX cabinet, and it is customized in system programming.
PAGE 77
Chapter 5 - Special Applications Section 200 - General Description MSG KEY Description: Large-Display phone users can program the MSG key to retrieve their Voice Mail messages. Benefits: • The MSG key is already labeled; it’s simple to remember and simple to press. ONE-TOUCH KEY FOR VOICE MAIL Description: Allows a user to program any one-touch key on the phone to automatically dial Voice Mail. The dial number for Voice Mail along with the user’s password can be stored under the key.
PAGE 78
Section 200 - General Description Chapter 5 - Special Applications POSITIVE DISCONNECT Description: Analog station ports can generate a positive disconnect (open loop) to devices that are attached to them upon hang-up. Benefits: • Sending this signal allows quick disconnection from third-party Voice Mail or similar devices. Automatic Call Distribution (ACD) ACD provides efficient presentation, handling, and management of incoming calls for phone systems that experience heavy call traffic.
PAGE 79
Chapter 5 - Special Applications • • • • • • • • • • • • 78 Section 200 - General Description Agent IDs per Group: 64 Maximum Agent IDs per ACD Unit: 64 Number of Agents Simultaneously Logged In: 32 Supervisor IDs per Group: 1 Supervisor IDs per ACD Unit: 6 Voice Ports per Group: 4 Voice Ports per ACD Unit: 4 Music Ports: 1 (on main unit/external MOH source) MIS Monitor Ports: 1 (RS232C 9600bps) Guidance Length: 1-96 seconds (changeable) Number of Guidance Messages: 1-6 (changeable) Total Guidance Record
PAGE 80
Section 200 - General Description Chapter 6 - Specifications CHAPTER 6 - SPECIFICATIONS Overview This chapter provides detailed lists of all system specifications in an easy-to-follow table format. Note: The following specifications are subject to change without notice.
PAGE 81
Chapter 6 - Specifications Section 200 - General Description Environmental Requirements Temperature and Humidity Requirements for System Operation (excluding Built-In Voice Mail) Environmental Conditions Requirements Temperature 0 to 40 degrees C (32 to 104 degrees F) Relative Humidity 30% to 90% non-condensing Storage Temperature –20 to +60 degrees C (–4 to +140 degrees F) Temperature and Humidity Requirements (Built-In Voice Mail operation only) Environmental Conditions Requirements Temperatur
PAGE 82
Section 200 - General Description Chapter 6 - Specifications Base Cabinet Expansion Cabinet VB-44225 1.04 kg Other key telephones 1.0 kg DSLT .73 kg DSS/72 .5 kg EM/24 .43 kg ICX-4.
PAGE 83
Chapter 6 - Specifications Section 200 - General Description Resource Maximums Line Capacities System Resources 1 Cabinet Ports (CO line or Station) 2 Cabinets 3 Cabinets 4 Cabinets 5 Cabinets 6 Cabinets 96 192 288 Speech Path Switching (CO line/Station) 384 480 576 Nonblocking Feature-Related Capacities Maximum for Resource 1 Cabinet CPU Configuration 2 Cabinets 3 Cabinets 4 Cabinets 5 Cabinets 6 Cabinets CPC-96 ----- ----- CPC-288 ----- ----- ----- ----- ----- ----- CPC-576 In
PAGE 84
Section 200 - General Description Chapter 6 - Specifications Maximum for Resource PSD Bins 1 Cabinet 20 2 Cabinets 3 Cabinets 4 Cabinets 5 Cabinets 6 Cabinets 20 20 20 20 20 SSD/PSD String Length 24 24 24 24 24 24 SSD Name Length 16 16 16 16 16 16 PSD Name Length 7 7 7 7 7 7 Trunk Name Length 10 10 10 10 10 10 Extension Name Length 10 10 10 10 10 10 Attendant Group 1 1 1 1 1 1 Attendant Group Members 20 20 20 20 20 20 Ext.
PAGE 85
Chapter 6 - Specifications Section 200 - General Description Maximum for Resource 1 Cabinet 2 Cabinets 3 Cabinets 4 Cabinets 5 Cabinets 6 Cabinets Account Codes: Verified Digits 4 4 4 4 4 4 Call Pickup Groups 12 24 36 48 60 72 Paging Groups 10 10 10 10 10 10 Paging Group Members 72 72 72 72 72 72 Hardware Maximums Maximum Quantity For Part No.
PAGE 86
Section 200 - General Description Chapter 6 - Specifications Maximum Quantity For Part No.
PAGE 87
Chapter 6 - Specifications Section 200 - General Description Maximum Quantity For Part No. Description VB-44330 PC Attendant Console 96 (1 Ext. + 1 DSS per Console unit) VB-44331 1 2 3 4 5 6 Cabinet Cabinets Cabinets Cabinets Cabinets Cabinets 12 24 36 48 60 72 PC Attendant Console 384 2 (1 Ext. + up to 5 DSSs per Console unit) 4 7 9 12 14 VB-44332 PC Phone (1 Ext.
PAGE 88
Section 200 - General Description Chapter 6 - Specifications Cabling Specifications Maximum Cabling Distances Loop Type Resistance Key Telephone, EM/24 DSS/72 SLT Resistance 40 Ohms 20 Ohms 100 Ohms Doorphone (loop between the 10 Ohms ICX and Doorphone Adapters) Doorphone (loop between the Doorphone Adapter and the Doorphone) 10 Ohms Cable Gauge (AWG) Maximum Cabling Length in Feet (distance from the ICX) 22 1239 24 779 26 490 22 619 24 330 26 245 22 3097 24 1948 26 1225 22 3
PAGE 89
Chapter 6 - Specifications Section 200 - General Description Voice/Data Transmission Voice Path from Digital Keyphones to the ICX Channel Speed Overall communications path 256 kbps D-channel data 16 kbps B-channel data 64 kbps Data Communication Ports Port Serial Port 1 Maintenance (Built-in) (Emergency) Serial Port 2 88 Parameters Interface: RS232-C Baud rate: 300, 600, 1200, 2400, 4800, 9600 Bps Parity: Even, odd, none Stop bit length: 2 or 1 Data bit length: 7 or 8 Baud rate: 300
PAGE 90
Section 200 - General Description Chapter 6 - Specifications Signaling Characteristics Signaling to CO Item Specification Dial pulse 8 to 11 pulses per second Break ratio 58% to 64% Minimum pause 0.7 to 1.
PAGE 91
Chapter 6 - Specifications 90 Section 200 - General Description ICX (International) issued June 2000 ICX-4.