Operating instructions

94 ICX (International), March/1999 ICX-35-700
Chapter 4. User Maintenance Section 700 - Operation
Set Personal Speed Dial Numbers
Description
For a description of Personal Speed Dial (PSD), see “Personal Speed Dial” on page 183 for a Digital
Key Telephone, “Personal Speed Dial” on page 243 for a Digital Single Line Telephone (DSLT), and
“Personal Speed Dial” on page 288 for a Single Line Telephone (SLT).
Operation
To set PSD numbers:
Hardware Requirements
•N/A
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the
81
level, enter
01
.
3. Press the
HOLD
key. 8101-
PSD Assignment displays
4. Press the
HOLD
key. 0 :
PSD Number displays
5. Press the
HOLD
key. EXT Number displays
6. Dial the extension number.
7. Press the
HOLD
key. Enter PSD # XXX displays (where
XXX = dialled extension number)
8. Enter the PSD bin number (
80
-
99
).
9. Press the
HOLD
key. YYY ZZ displays (where XXX
= extension number, YYY = assigned
name, and ZZ = PSD bin number)
10. Enter the PSD digits to be dialled.
Note:
To clear an entry or existing data, press the
FL/R
key.
11. Press the
HOLD
key to store the entry. Next PSD bin number displays
12. To set additional PSD numbers, press the volume up and
down key or press the
HOLD
key to move to the desired
PSD bin number.
Desired PSD bin number displays
13. Repeat steps 10-12 until all PSD numbers are entered.
14. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF
LED goes off