Operating instructions

Section 700 - Operation Chapter 3. System Features
ICX-35-700 ICX (International), issued March/1998 51
Hardware Requirements
•N/A
Considerations
• Extension names can be up to 10 characters in length.
• The ability to make extension name assignments is allowed/restricted to anyone with a Class of
Service (COS) that allows access to User Maintenance features. (See Chapter 4 “User
Maintenance” of this document.)
Speed Dial Name Assignments
You can assign names to PSD numbers from a display telephone without entering the programming
mode. If allowed in the Extension COS, you can also assign names to SSD numbers.
Operation
PSD Names:
To set PSD names using a large-display or small-display phone:
Action Result
1. Lift the handset or press the
ON/OFF
key.
2. Press the
PROG
key.
3. Press the
*
key.
4. Enter
0
for the PSD Name Assignment mode.
A B C D E F P80
displays (where P80 =
PSD bin 80)
5. Press the up or down arrow key to display the desired PSD
bin number.
A B C D E F PXX
displays (where PXX
= desired PSD bin number)
6. Enter the extension name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
48.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 49.)
Note:
Press the
FL/R
key to clear any existing data
7. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-display phone” on page 48.
• See “Example 2. Small-display phone” on page 49.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
8. Repeat steps 6-7 as many times as necessary to enter the
desired PSD name.
Note:
Press the
FL/R
key to clear the entire entry.
9. Press the
HOLD
key when finished. Next PSD bin number displays
10. To enter another speed dial name repeat steps 5-9.