Operating instructions

Section 700 - Operation Chapter 3. System Features
ICX-35-700 ICX (International), issued March/1998 47
Name Assignments
Description
Names may be assigned to the following:
• Extensions
• Trunks
• Direct Dial Inwards (DDIs)
• Personal Speed Dials (PSDs)
• Systems Speed Dials (SSDs)
Trunk names and DDI names must be assigned in dealer programming mode. Extension names and
Speed Dial names may be assigned from a display telephone.
This feature does not require the use of a DSS/72 console or entering the programming mode.
Extension Name Assignments
Extension names can be up to 10 characters in length. (Assignment of extension names must be
allowed in the Extension COS.)
Operation
To set extension names using a large-display or small-display phone:
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Press the
PROG
key.
3. Press the
*
key.
4. Enter
2
for the Extension Name Assignment mode. EXT NO.=>
EXT NAME
displays
5. Enter the extension number.
6. Press the
HOLD
key. XXX
A B C D E F XXX
displays (where
XXX = extension number)
7. Press the
FL/R
key to clear the existing data.
A B C D E F XXX
displays (where
XXX = extension number)
8. Enter the extension name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
48.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 49.)