Operating instructions

266 ICX (International), issued March/1999 ICX-35-700
Chapter 7. SLT Features Section 700 - Operation
To cancel Call Forwarding - All Calls:
Call Forwarding - Busy
When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.
To set Call Forwarding - Busy:
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter
731
(UK/HK) or
731#
(Taiwan,
Malaysia, Indonesia).
• For another extension, enter
751
(UK/HK) or
751#
(Tai-
wan, Malaysia, Indonesia).
3. If cancelling Call Forwarding for another extension, enter
the extension number.
4. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter
722
(UK/HK) or
722#
(Taiwan,
Malaysia, Indonesia).
• For another extension, enter
742
(UK/HK) or
742#
(Tai-
wan, Malaysia, indonesia).
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you want to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the
#
key then
enter the SSD bin number.
Note:
Any outside number used for Call Forwarding must
already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 276.)
5. Replace the handset.