Operating instructions

Section 700 - Operation Chapter 6. DSLT Features
ICX-35-700 ICX (International), issued March/1999 245
or extension number for speed dialling. If the System is set at Intercom Level, you must enter the
MCO Code when programming an outside number for speed dialling.
System Speed Dial
You can store frequently called numbers using the SSD feature. Either 80 or 800 SSD numbers can be
programmed, depending on how the System is configured. In an 80 SSD-number system, the SSD
numbers are stored in bins 00-79. In 800 SSD-number systems, the SSD numbers are stored in bins
000-799.
Operation
To assign SSD numbers:
To dial an SSD number by entering the speed dial bin number:
To delete an SSD number:
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default =
710
[UK/
HK] or
710#
[Taiwan, Malaysia, Indonesia]).
3. Enter the SSD bin number (
00
-
79
or
000
-
799
).
4. Dial the phone number.
5. Press the
HOLD
key.
6. Replace the handset or press the
ON/OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. If necessary, access an outside line. Outside dial tone
3. Press the
MEMORY
key.
OR...
Enter the Speed Dial Originate code (default =
80
).
4. Enter the SSD bin number (
00
-
79
or
000
-
799
).
5. Complete call and replace the handset or press the
ON/OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default =
710
[UK/
HK] or
710#
[Taiwan, Malaysia, Indonesia]).
3. Enter the SSD bin number (
00
-
79
or -
799
).