Operating instructions

240 ICX (International), issued March/1999 ICX-35-700
Chapter 6. DSLT Features Section 700 - Operation
Hardware Requirements
•N/A
Considerations
• The trunk call type may be either multiple ring, direct, or camp-on.
• The system does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• The receiving telephone is a 3rd party voice mail.
Offhook Voice Announce
CPC-96, CPC-288, and CPC-576 Version 2.0
Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can also
transfer a held call to a busy extension after making the announcement using this feature.
Operation
To make an OHVA :
To transfer a call using OHVA:
Action Result
1. Lift the handset or press the
ON/OFF
key.
2. Dial the extension number. Busy signal
3. Enter the OHVA feature access code (default =
8
[UK/HK]
or
8#
[Taiwan, Malaysia, Indonesia]).
4. Make your announcement
Action Result
1. While on a call, press the
HOLD
key. Current call on hold
2. Dial the extension number to which the call is being trans-
ferred.
Busy signal
3. Enter OHVA feature access code (default =
8
[UK/HK] or
8#
[Taiwan, Malaysia, Indonesia]) and announce the call to
be transferred.
4. If transfer is not accepted, press the
FL/R
key. Transfer cancelled
5. Replace the handset.