Operating instructions

236 ICX (International), issued March/1999 ICX-35-700
Chapter 6. DSLT Features Section 700 - Operation
Hardware Requirements
•N/A
Considerations
•N/A
Flash
CPC-96, CPC-288, and CPC-576 All Versions
Description
You can send a flash signal on your telephone to release an outside line and then either automatically
reseize the same outside line or switch to extension dial tone status by pressing the FLASH key.
Trunk programming determines whether your phone reseizes the outside line or switches to extension
dial tone status.
Hardware Requirements
•N/A
Considerations
•N/A
Hot Line
CPC-96, CPC-288, and CPC-576 All Versions
Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number
simply by lifting the handset. You do not have to dial any digits.
Operation
To immediately connect to a pre-assigned extension or speed dial number:
Hardware Requirements
•N/A
Considerations
•N/A
Action Result
1. Lift the handset or press the
ON/OFF
key. Automatically connected to pre-assigned
extension or speed dial number