Operating instructions

Section 700 - Operation Chapter 6. DSLT Features
ICX-35-700 ICX (International), issued March/1999 219
Operation
To set Call Forwarding - Busy:
To cancel Call Forwarding - Busy:
Call Forwarding - No Answer
When Call Forwarding - No Answer is set, a call will ring until the Call Forward - No Answer timer
expires. When the timer expires, the unanswered call is forwarded.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter
722
(UK/HK) or
722#
(Taiwan,
Malaysia, Indonesia).
• For another extension, enter
742
(UK/HK) or
742#
(Tai-
wan, Malaysia, Indonesia).
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you want to forward
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the
#
key then
enter the SSD bin number.
Note:
Any outside number used for Call Forwarding must
already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 243.)
5. Replace the handset or press the
ON/OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter
732
(UK/HK) or
732#
(Taiwan,
Malaysia, Indonesia).
• For another extension, enter
752
(UK/HK) or
752#
(Tai-
wan, Malaysia, Indonesia).
3. If cancelling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset or press the
ON/OFF
key.