Operating instructions

214 ICX (International), issued March/1999 ICX-35-700
Chapter 6. DSLT Features Section 700 - Operation
Operation
To call an attendant group:
Hardware Requirements
•N/A
Considerations
• Up to 20 extensions can be included in an attendant group.
• The attendant pilot number is flexible.
• If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialled.
• Attendant calls are always tone calls (i.e., not voice calls).
Auto Repeat Dial
CPC-96, CPC-288, and CPC-576 All Versions
Description
If you press the REDIAL key while receiving busy tone on an outside call, the System automatically
redials the number. The System continues to redial the number at set intervals until the called number
answers, the caller hangs up, or the maximum of 15 redial attempts is made.
Operation
To use Auto Repeat Dial:
Hardware Requirements
•N/A
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Enter the attendant pilot number (default =
0
[UK/HK] or
9
[Taiwan, Malaysia, Indonesia]).
Action Result
1. Press the
ON/OFF
key. Intercom dial tone
2. Enter a trunk access code (default =
9
[UK/HK],
0
[Taiwan,
Malaysia, Indonesia], or
81-84
).
3. Dial the phone number. Busy tone
4. Press the
REDIAL
key. System automatically redials number