Operating instructions

184 ICX (International), issued March/1999 ICX-35-700
Chapter 5. Key Telephone Features Section 700 - Operation
To check a PSD number:
To delete a PSD number:
Hardware Requirements
•N/A
Considerations
• PSD number can be dialled from One-Touch keys. (For additional information, see “One-Touch
Keys” on page 179.)
• Storing a new number erases any previously stored data.
• If the called party’s number and name are stored in the PSD code, that information appears on the
display when you use the speed dial code.
3. Press the
MEMORY
key.
OR...
Enter the Speed Dial Originate code (default =
80
).
4. Enter the PSD bin number (
80-99
).
5. Complete the call and replace the handset or press the
ON/
OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. Press the
CONF
key.
C
displays
3. Press the
MEMORY
key.
4. Enter the PSD bin number (
80-99
). Programmed data displays
5. If you want to check the next PSD number, press the
HOLD
key.
6. Replace the handset or press the
ON/OFF
key.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
2. (A) Press the
PROG
key.
(B) Press the
MEMORY
key.
OR...
(A) Enter the Speed Dial Set/Clear code (default =
710
[UK/HK] or
710#
[Taiwan, Malaysia, Indonesia]).
3. Enter the PSD bin number (
80-99
).
4. Press the
HOLD
key.
Cleared Spd Dial
displays
5. Replace the handset or press the
ON/OFF
key.
Action Result