Operating instructions

Section 700 - Operation Chapter 5. Key Telephone Features
ICX-35-700 ICX (International), issued March/1999 177
Operation
To make an OHVA :
To answer an OHVA:
To transfer a call using OHVA:
4 Transfer 9 User Defined
5 Unavailable 0 User Defined
Action Result
1. Lift the handset or press the
ON/OFF
key.
2. Dial the extension number. Busy signal
3. Enter the OHVA feature access code (default =
8
[UK/HK]
or
8#
[Taiwan, Malaysia, Indonesia]).
•
OHVA EXT XXX
displays if busy
extension called (where XXX = calling
extension.
•
INT
LED flashes
4. Make your announcement
Action Result
1. Press the OHVA Split key.
Note:
You must program an FF key as a split key (default =
*71
) to use this feature.
Split key flashes red
2. To return to the previous call, press the Split key again. The OHVA originating party receives
Busy signal.
Action Result
1. Press the
HOLD
key to put the current call on hold. Current call on hold
2. Dial the extension number to which the call is being trans-
ferred.
Busy signal