Operating instructions

164 ICX (International), issued March/1999 ICX-35-700
Chapter 5. Key Telephone Features Section 700 - Operation
Handsfree Answerback
CPC-96, CPC-288, and CPC-576 All Versions
Description
Handsfree Answerback allows you to answer an intercom call without lifting the handset.
The System must be programmed for Voice Calling for you to use this feature. You must press
1
during a call to switch from Tone Calling to Voice Calling.
Operation
To answer calls using Handsfree Answerback:
Hardware Requirements
•N/A
Zip Mode On/Off (toggle)
∗
73 (Version 3.5 and higher)
Direct Call to a PDN Ext.
∗
74 766 (UK/HK) or 766# (TMI)
UNA Pickup
∗
77 705 (UK/HK) or 705# (TMI)
Absence Message Code
∗
78 729 (UK/HK) or 729# (TMI)
Network Flash during Talk on FF-Key
∗
79
767 (UK/HK) or 767# (TMI)
(Version3.5 and higher)
PDN #1 Key 01
PDN #2 Key 02
PDN #3 Key 03
NPDN #1 Key 01 + (Ext No. 0-9999)
NPDN #2 Key 02 + (Ext. No. 0-9999)
NPDN #3 Key 03 + (Ext. No. 0-9999)
ACD-1 Wrap Key
∗
#83 (Version 3.5 and higher)
ACD-2 Wrap Key
∗
#88 (Version 3.5 and higher)
Text Message Sent
∗
75 + (Message code no. 0-9)
Text Message Reply
∗
76 + (Message code no. 0-9)
Login Key for CTAPI
∗
#90 (Version 3.5 and higher)
Action Result
1. When the intercom call arrives, confirm that the MIC LED
is off.
(If it is lit, press the MIC key to turn it off.)
2. Speak into the microphone to answer.
Feature Description
REDIAL + Fixed Feature
Code + (additional digits to
program into key)
Default Flexible Feature Code
(if not listed, must use Fixed Feature
Code)