Operating instructions

146 ICX (International), issued March/1999 ICX-35-700
Chapter 5. Key Telephone Features Section 700 - Operation
To leave a text message while camped-on:
To reply to a text message:
To answer a Camp-on (Call Waiting) signal:
Hardware Requirements
•N/A
Considerations
• You can transfer an outside call to a busy extension using Camp-on. See “To camp a call onto a
busy extension:” on page 139.
• Manual camp-on to a busy extension will not Call Forward/No Answer.
• Automatic camp-on to a busy extension will Call Forward/No Answer.
• Calls transfered to a busy extension will Call Forward.
3. Enter the Camp-on (Call Waiting) code (default =
2
[UK/
HK] or
2#
[Taiwan, Malaysia, Indondesia]).
•
Wait XXX
displays (where XXX =
extension number/name)
• Called party hears alert tone from the
speaker
• Calling party hears ringback tone
4. Remain on the line until the called party answers.
Action Result
1. Press the
MSG
FF key.
2. Enter the Send Text Message number (
1-9
,
0
). (See Table 16
on page 145 for the send text messages.)
The send text message appears on the
busy telephone display.
Action Result
1. Press the
MSG
FF key.
2. Enter the Reply Text Message number (
1-9
,
0
). See Table 17
on page 145 for the text message replies.)
The text message reply appears on the
camped on telephone display.
Action Result
1. Replace the handset or press the
ON/OFF
key.
2. Lift the handset or press the
ON/OFF
key again to be con-
nected to the waiting call.
OR....
Press the
HOLD
key.
• Current call placed on hold
• Connected to waiting call
Action Result