Operating instructions

Section 700 - Operation Chapter 5. Key Telephone Features
ICX-35-700 ICX (International), issued March/1999 139
To transfer a call to an outside number without supervising the transfer:
Camping a Call Onto a Busy Extension
Operation
To camp a call onto a busy extension:
Hardware Requirements
•N/A
Considerations
• If On-Hook Transfer is not enabled for the transferring party’s Extension Class of Service (COS),
he/she must
press the PROG or RELEASE key before hanging up to complete the transfer.
• If the call is not answered by the third party before the Transfer Recall Timer expires, the call
will recall to the transferring extension.
• If a Transfer Recall is not answered before the Recall Duration Timer expires, the call will revert
to the Attendant group.
Action Result
1. While on a call, press the
HOLD
key. Intercom dial tone
2. Press a vacant trunk key or enter a trunk access code
(default = 9 [UK/HK] or 0 [Taiwan, Malaysia, Indonesia]).
3. Dial the number to which the call is to be transferred.
4. Complete the transfer:
• If On-Hook Transfer is enabled for your Extension COS,
complete the transfer by replacing the handset or pressing
the
ON/OFF
key.
• If On-Hook Transfer is disabled, press the
PROG
key (or
RELEASE
key is using DSS/72).
Action Result
1. While on a call, press the
HOLD
key. Intercom dial tone
2. Dial the extension number to which the call is to be trans-
ferred.
3. If your extension does not have Auto Camp-on activated,
enter the Camp-on (Call Waiting) code (default =
2
[UK/
HK] or
2#
[Taiwan, Malaysia, Indondesia]).
Camp-on tone heard at the called exten-
sion
4. Complete the transfer:
• If On-Hook Transfer is enabled for your Extension COS,
complete the transfer by replacing the handset or pressing
the
ON/OFF
key
• If On-Hook Transfer is disabled, press the
PROG
key (or
RELEASE
key is using DSS/72).