Operating instructions

Section 700 - Operation Chapter 5. Key Telephone Features
ICX-35-700 ICX (International), issued March/1999 133
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
To retrieve a transferred call park:
Hardware Requirements
•N/A
Considerations
• You cannot park more than one call at a time.
• Call Park functions can be assigned to FF keys (see “Flexible Function Keys” on page 158).
• No more than one Call Park Answer key may be assigned to a single telephone.
• A Call Park Answer key may not be assigned to the EM/24 or DSS/72 console.
• If a call is parked by Call Park key, the LED flashes.
Action Result
1. Lift the handset or press the
ON/OFF
key. Intercom dial tone
Enter the Call Park Answer/Other Ext. access code (default
=
773
[UK/HK] or
733#
[Taiwan, Malaysia, Indonesia]).
OR...
Enter the Call Park/Floating Hold Answer feature access
code (default =
*9
). (Version 3.0 and higher)
Enter Park EXT
# displays
2. Dial the number of the extension that parked the call. •
CO TALK TRK #XX
displays (where
XX = line number)
• Connected to parked call
Action Result
1. Press the
HOLD
key. • Current call on hold
•
CO HOLD #XX
displays (where XX =
trunk number)
2. Enter the Call Park Transfer access code (default =
774
[UK/HK] or
774#
[Taiwan, Malaysia, Indonesia]).
Enter TRNS EXT #
displays
3. Dial the extension number to receive the parked call.
Park (ext#)
displays on lower display
4. If necessary, page the party that needs to retrieve the call.
Action Result
1. At the extension with the transferred park call, lift the hand-
set or press the
ON/OFF
key.
Intercom dial tone
2. Enter Call Park Answer/Self access code (default =
772
[UK/HK] or
772#
[Taiwan, Malaysia, Indonesia]).
•
CO TALK TRK #XX
displays (where
XX = line number)
• Connected to parked call